Loctite branded flange sealing products help prevent leakage of liquids or gases. They create an impermeable barrier resistant to pressure, temperature and aging. Liquid anaerobic products or silicone seals precisely fill the space between the sealed elements for maximum contact. This also prevents corrosion of the components. The liquid gasket does not shrink, crack or deform, unlike traditional flat gaskets. The liquid Loctite gasket resists being pushed out from between flange fittings, unlike flat gaskets.
Loctite MR 5922 200 ml black solvent sealant, for flanges, fittings and connections, flexible after evaporation, seals the joint
Black, solvent-based sealing compound.
Availability: Available >20 pcs
Loctite 574 50 ml anaerobic sealant for rigid flanges, thixotropic, oil, water and glycol resistant
Anaerobic Sealant Machined Flange Joints General Purpose
Availability: Available 10-20 pcs
Loctite SI 5699 GY 300 ml gray flexible flange sealant, water, glycol and oil resistant, P1 NSF approved, for gears, metal housings, cast or plastic surfaces
Loctite SI 5699 is primarily intended for flange sealing, it is a product with excellent oil resistance for the sealing of rigid gear flanges and cast metal housings.
Availability: Available 10-20 pcs
Loctite SI 5920 CO 80 ml high-temperature copper silicone in a tube for sealing flanges and gaps up to 1 mm, easily removable, up to 350 ° C, can be used for electrical insulation, non-corrosive
LOCTITE SI 5920 CO copper 80 ml
Availability: Available 10-20 pcs
Loctite SI 5970 BK 300 ml black one-component silicone, oil resistant, resistant to strong vibrations and deformation, good adhesion to metal and plastic, for sealing flanges
LOCTITE SI 5970 is a black, one-component silicone sealant based on acetoxy silicone that cures at room temperature. It shows high resistance to strong vibrations and deformations. It is a silicone with good oil resistance and resistance to significant displacement in joints. Quick drying product - it is dry to the touch after 25 minutes.
Availability: Available >20 pcs
Loctite 510 pink high temperature flange sealant, medium strength, high viscosity, heat and chemical resistant, for rigid metal joints, P1 NSF approved, fills gaps up to 0.25 mm
One-component anaerobic sealant for rigid machined metal flanges with medium strength and good heat resistance
Availability: Available - <10 pcs
Loctite 518 300 ml medium strength anaerobic gelled metal flange sealant (liquid gasket), up to 0.25 mm gaps, flexible, chemical resistant, easy disassembly, NSF P1, high pressure resistant
General purpose flange sealant, semi-detachable.
Availability: Available - <10 pcs
Loctite 518 50ml medium strength anaerobic gel flange sealant (liquid gasket), up to 0.25mm gaps, flexible, chemical resistant, easy disassembly, NSF P1, high pressure resistant
General purpose flange sealant, semi-detachable.
Availability: Available - <10 pcs
Loctite 573 50 ml slow curing anaerobic flange sealant, for rigid large joints, gearbox, engine block
One-component anaerobic sealant for rigid machined metal flanges, low strength, very slow curing
Availability: Available - <10 pcs
Loctite SI 5920 CO 300 ml high-temperature copper silicone for sealing flanges and gaps up to 1 mm, easily removable, up to 350 ° C, can be used for electrical insulation, non-corrosive
High-temperature copper silicone for sealing flanges and gaps up to 1mm, easily removable, up to 350 ° C, can be used for electrical insulation, non-corrosive
Availability: Available - <10 pcs
Loctite SI 5926 100 ml blue universal silicone sealant, flexible, for flanges and treated surfaces, for metal and plastic, resistant to aging, does not shrink, does not harden, does not crack
Blue universal silicone sealant, flexible, for flanges and treated surfaces, for metal and plastic, resistant to aging, does not shrink, does not harden, does not crack.
Availability: Available - <10 pcs
Loctite SI 5980 100ml Black Silicone, Liquid Quick Seal for Flange Joint Sealing, Oil Resistant, No Hazardous Substances, For Engines, Oil Pans, Gearbox
Black silicone for flange sealing, oil resistant, general purpose. Easy to apply thanks to the compressed gas cartridge.
Availability: Available - <10 pcs
Loctite SI 5910 BK 50 ml price for 1 item, sale in packs of 10, black silicone, oil-resistant, for sealing flanges, resistant to joint movement
One-component, oil-resistant silicone sealant for flange connections. It fills larger gaps very well and does not cause corrosion. Color: black.
Availability: Available - <10 pcs
Loctite 510 pink high temperature flange sealant, medium strength, high viscosity, heat and chemical resistant, for rigid metal joints, P1 NSF approved, fills gaps up to 0.25 mm
One-component anaerobic sealant for rigid machined metal flanges with medium strength and good heat resistance
Availability: On order
Loctite 5188 300 ml x10 pcs.very flexible anaerobic sealant for metal flanges (liquid seal), dedicated to aluminum, chemically resistant, easy to disassemble, tolerates slight surface oil contamination
Highly flexible and oil and chemical resistant anaerobic sealant
Availability: On order
Loctite 5188 50 ml x12 pcs.very flexible anaerobic sealant for metal flanges (liquid seal), dedicated to aluminum, chemically resistant, easy to disassemble, tolerates slight surface oil contamination
Highly flexible and oil and chemical resistant anaerobic sealant
Availability: On order
Loctite 573 250 ml slow curing anaerobic flange sealant, for rigid large joints, gearbox, engine block
One-component anaerobic sealant for rigid machined metal flanges, low strength, very slow curing
Availability: On order
Loctite 574 250 ml anaerobic sealant for rigid flanges, thixotropic, oil, water and glycol resistant
Anaerobic Sealant Machined Flange Joints General Purpose
Availability: On order
Advantages of Loctite liquid seals
- one-component products - easy and clean application
- universal, one product for many flange sizes, reduce inventory costs
- fill the entire space between the sealed elements
- it is not necessary to retighten the joints over time
instant low pressure seal - high resistance to solvents
- very good pressure resistance after full hardening (approx. 24 h)
Which product to choose for sealing flange connections?
When choosing a product, you should pay attention to the following factors:
- working temperature
- size of the gap between the flanges
- type of sealed material (metal - anaerobic products and silicones or plastic - only silicones)
- whether the seal should be stiff (anaerobic products) or flexible (silicones)
Surface preparation
Old sealant residues should be removed with Loctite 7200. Then degrease the surface with Loctite 7063. If the product is applied at temperatures below 5 ° C, use Loctite 7649.