LRTM mold release agents and accessories

LOCTITE Frekote 770-NC is a clear solvent based release agent. It is a very fast drying product that provides good glide for molds with problematic geometries. The universal release agent is ideal for advanced composites and parts made of polyester FRP.

LOCTITE Frekote Frewax is an easy-to-use polymer separator. The combination of wax and semi-permanent release agent makes the easy-to-apply product creates a visible layer that facilitates even application of the agent, and at the same time has the ability of a polymer resin for multiple separation. Polished Frewax leaves a shiny surface that can be detached multiple times.

PULSAR PABS - professional release agent for injection molds and plastics processing. Easy to apply, colorless, does not contain silicone. Excellent anti-adhesive properties are ensured by a set of ingredients, mainly base oil of extraordinary purity of 99.9%. It is crystal clear, colorless, highly resistant to evaporation at high temperatures, and also fluid at -20 ° C. It works antistatic, it is an insulator, and it dissipates heat well. It has high physical and chemical resistance. Can be used as a low viscosity lubricant.

PULSAR PAS - Specialized release agent, for plastic processing injection molds. Easy to apply thanks to aerosol, colorless. Excellent release properties are mainly provided by silicone oil and a set of organic solvents. It is extremely pure, colorless. It has an antistatic effect and is an insulator, with good heat dissipation. After evaporation of the carrier components, it shows excellent temperature resistance. It has high physical and chemical resistance.

LOCTITE Frekote PMC, thanks to the appropriate combination of special solvents, perfectly copes with dissolving and removing wax from polyester molds without the risk of tarnishing the surface. Due to its strong properties, Frekote PMC has numerous applications and is recommended for cleaning the surface of polyester molds before applying sealants.

Rust remover with MOS2 / molybdenum disulfide / WIKO ROSTLÖSER is an indispensable aid in repairs, maintenance and service work. It not only quickly and reliably solves problems such as seizure and corrosion of screw connections, but can also be used as a lubricant and contact agent. Thanks to capillary action and excellent creep properties, WIKO ROSTLÖSER with MOS2 penetrates even the smallest gaps.

string for cutting car windows when replacing them. Thanks to its use, it is easy to remove the damaged glass and speed up the replacement.

Wax Calibrated for LRTM 1mm molds - wax with a constant thickness of 1mm. Designed for gluing LRTM forms to set the appropriate thickness of the element. It allows you to stick forms with even very complex geometry. One side of the sheet is self-adhesive, which enables and facilitates precise gluing.

A sheet with dimensions of 305mm x 610mm x 1mm.

8 pieces.

Wax Calibrated for LRTM 1mm molds - wax with a constant thickness of 1mm. Designed for gluing LRTM forms to set the appropriate thickness of the element. It allows you to stick forms with even very complex geometry. One side of the sheet is self-adhesive, which enables and facilitates precise gluing.

A sheet with dimensions of 305mm x 610mm x 1mm.

1 piece.

Wax Calibrated for LRTM 2mm molds - wax with a constant thickness of 2mm. Designed for gluing LRTM forms to set the appropriate thickness of the element. It allows you to stick forms with even very complex geometry. One side of the sheet is self-adhesive, which enables and facilitates precise gluing.

A sheet with dimensions of 305mm x 610mm x 2mm.

8 pieces.

Wax Calibrated for LRTM 2mm molds - wax with a constant thickness of 2mm. Designed for gluing LRTM forms to set the appropriate thickness of the element. It allows you to stick forms with even very complex geometry. One side of the sheet is self-adhesive, which enables and facilitates precise gluing.

A sheet with dimensions of 305mm x 610mm x 2mm.

1 piece.

Wax Calibrated for LRTM 3mm molds - wax with a constant thickness of 3mm. Designed for gluing LRTM forms to set the appropriate thickness of the element. It allows you to stick forms with even very complex geometry. One side of the sheet is self-adhesive, which enables and facilitates precise gluing.

A sheet with dimensions of 305mm x 610mm x 3mm.

4 pieces.

Wax Calibrated for LRTM 3mm molds - wax with a constant thickness of 3mm. Designed for gluing LRTM forms to set the appropriate thickness of the element. It allows you to stick forms with even very complex geometry. One side of the sheet is self-adhesive, which enables and facilitates precise gluing.

A sheet with dimensions of 305mm x 610mm x 3mm.

1 piece.

Wax Calibrated for LRTM 4mm molds - wax with a constant thickness of 4mm. Designed for gluing LRTM forms to set the appropriate thickness of the element. It allows you to stick forms with even very complex geometry. One side of the sheet is self-adhesive, which enables and facilitates precise gluing.

A sheet with dimensions of 305mm x 610mm x 4mm.

4 pieces.

Wax Calibrated for LRTM 4mm molds - wax with a constant thickness of 4mm. Designed for gluing LRTM forms to set the appropriate thickness of the element. It allows you to stick forms with even very complex geometry. One side of the sheet is self-adhesive, which enables and facilitates precise gluing.

A sheet with dimensions of 305mm x 610mm x 4mm.

1 piece.

Gasket dimensions - 25 mm wide x 12 mm high