Vendor
Price
-
from
to
New
On sale
Rosin 40g flux with the addition of activators to facilitate soldering
Flux with the addition of activators to facilitate soldering. The product has an activity similar to solder paste. Used as a base for a standard flux (25% solution in isopropyl alcohol).
Availability: Available >20 pcs
Soldering paste 40g medium-active flux with a pasty consistency that facilitates soldering
Solder paste according to DIN EN 29454 5-1 1.1.2.C is a medium activity flux prepared from:
based on turpentine and an organic halogen activator that facilitates welding of copper, silver, zinc and nickel components. It is used for descaling and welding in engineering
radio and telecommunications and assembly of electrical equipment. No flux residue after soldering
They corrode non-ferrous metals and may remain on welds. (It is recommended to wash with detergent
alcoholic).
The product is mainly used when rosin is not enough
Availability: Available >20 pcs
Flux (Topnik) RF800 50 ml with a brush for bleaching, fitting soldering, no cleaning
Topnik (Flux) RF800 50 ml with brush - rosin solution, medium active, does not require washing. Used for bleaching cables, ends and soldering of mating surfaces. In professional and utility use. Perfectly wets Cu and PbSn surfaces.
Availability: Available 10-20 pcs
Rosin 100g flux with the addition of activators to facilitate soldering
Flux with the addition of activators to facilitate soldering. The product has an activity similar to solder paste. Used as a base for a standard flux (25% solution in isopropyl alcohol).
Availability: Available 10-20 pcs
Sodium persulfate B327 1L for etching and dissolving printed circuits
Sodium persulfate B327 - from AG TermoPasty is an agent in the form of a crystalline, fine powder for etching and dissolving printed circuits and copper. In trace amounts, it includes, among others manganese, iron, ammonia and active oxide
Availability: Available - <10 pcs
Soldering acid 35ml for nickel-plated surfaces
Soldering acid 35 ml - by AG TermoPasty is an agent with 35% phosphoric acid. The acid helps a lot and makes it easier to solder hard-to-solder nickel-plated surfaces. The preparation should be applied in small amounts and washed with water. Be especially careful when using the fluid.
Availability: Available 10-20 pcs
Soldering paste 100g medium-active flux with a pasty consistency that facilitates soldering
Solder paste according to DIN EN 29454 5-1 1.1.2.C is a medium activity flux prepared from:
based on turpentine and an organic halogen activator that facilitates welding of copper, silver, zinc and nickel components. It is used for descaling and welding in engineering
radio and telecommunications and assembly of electrical equipment. No flux residue after soldering
They corrode non-ferrous metals and may remain on welds. (It is recommended to wash with detergent
alcoholic).
The product is mainly used when rosin is not enough
Availability: Available 10-20 pcs
Soldering tin with flux in a bottle Sn60Pb40-SW26/2.5% Ø 1.00 10 g, solder binder, electronics industry
Soldering tin Sn60Pb40-SW26/2.5% Ø 1.00 10g in a bottle is a product with specifications and properties ideal for professional soldering in electronics and electrical engineering, especially where RoHS2 compliance is not required.
Availability: Available >20 pcs
Soldering tin with flux in a vial Sn60Pb40-SW26/2.5% Ø 1.00 16 g, solder binder, electronics industry
Soldering tin in a vial Sn60Pb40-SW26/2.5% Ø 1.00 16 g is a product with specifications and properties that are ideal for professional soldering in electronics and electrical engineering, especially in cases where compliance with the RoHS2 directive is not required.
Availability: Available >20 pcs
Flux (Topnik) RF800 100 ml with a brush for bleaching, fitting soldering, no cleaning
Topnik (Flux) RF800 100 ml with brush - rosin solution, medium active, does not require washing. Used for bleaching cables, ends and soldering of mating surfaces. In professional and utility use. Perfectly wets Cu and PbSn surfaces.
Availability: Available - <10 pcs
Flux TK83 50ml with a brush
Flux TK 83
Liquid, medium active flux type 1.1.2/3 A according to ISO 9454-1, alcohol solution of rosin with the addition of organic activators, max. soldering temperature 280ºC. Whole parts content 24%. Perfect for hand tinning to restore solderability.
Availability: Available - <10 pcs
Gel flux 1.4ml in a syringe for SMT repair and assembly
Flux Gel is a thickened RMA grade rosin for SMT assembly and repair. Flux Gel can be applied using a sieve, device or syringe. The activators used in the flux production process allow its residues to remain on the packaging after the soldering process (unless the production process includes washing stages)
Availability: Available - <10 pcs
Lead-free filler with flux Sn99.3Cu0.7-1.1.3/3.0% Ø 0.50 100 g (Cu1) for manual and automatic soft soldering, rosin tin
Lead-free soldering tin Sn99.3Cu0.7 with flux 1.1.3/3.0% Ø 0.50 100 g (Cu1) is a high-quality product that ensures the effectiveness and durability of connections during soldering. Thanks to its properties, it is a solution that will be used in many industries, while maintaining compliance with the latest ecological regulations.
Availability: Available 10-20 pcs
Lead-free filler with flux Sn99.3Cu0.7-1.1.3/3.0% Ø 0.70 100 g (Cu1) for manual and automatic soft soldering, rosin tin
Lead-free soldering tin Sn99.3Cu0.7 with flux 1.1.3/3.0% Ø 0.70 100 g (cu1) is a high-quality product that ensures the effectiveness and durability of connections during soldering. Thanks to its properties, it is a solution that will be used in many industries, while maintaining compliance with the latest ecological regulations.
Availability: Available >20 pcs
Lead-free filler with flux Sn99.3Cu0.7-1.1.3/3.0% Ø 1.00 100 g (Cu1) for manual and automatic soft soldering, rosin tin
Lead-free soldering tin Sn99.3Cu0.7 with flux 1.1.3/3.0% Ø 1.00 100 g (cu1) is a high-quality product that ensures the effectiveness and durability of connections during soldering. Thanks to its properties, it is a solution that will be used in many industries, while maintaining compliance with the latest ecological regulations.
Availability: Available 10-20 pcs
Lead-free soldering tin in a vial Sn99.3Cu0.7-SW26/2.5% Ø 1.00 10 g (Cu1) 0577-5
Lead-free soldering tin in a vial Sn99.3Cu0.7-SW26/2.5% Ø 1.00 10 g (Cu1) is a product that combines efficiency, environmental safety and universal application. The product is created in the first melting process of tin and copper, which guarantees its excellent quality and minimizes the occurrence of oxides. It is an ideal alternative to solders containing lead.
Availability: Available - <10 pcs
Lead-free soldering tin in a vial Sn99.3Cu0.7-SW26/2.5% Ø 1.00 14 g (Cu1) 0563-8
Lead-free soldering tin in a vial Sn99.3Cu0.7-SW26/2.5% Ø 1.00 14g (Cu1) is a product that combines efficiency, environmental safety and universal application. The product is created in the first melting process of tin and copper, which guarantees its excellent quality and minimizes the occurrence of oxides. It is an ideal alternative to solders containing lead.
Availability: Available - <10 pcs