Iterm 6MB heating oil Orlen 205L for closed heating systems, furnaces fired with solid fuels, protection against wear, oxidation, degradation, resistance to foaming
Description
Iterm 6 MB heating oil is based on a mineral, highly refined base. It contains antioxidant, washing, dispersing additives and increasing the oil's resistance to foaming. Large packaging - 205l barrel is more economical for larger heating systems.
Properties of heating oil
- Very good resistance to thermal degradation
- easy start-up of the installation due to low viscosity
- high efficiency in maintaining circulation
- excellent long service life - the formulation prevents the formation of decomposition products and an increase in oil viscosity
- very good heat transfer coefficient
Use
- Closed heating systems
- In furnaces fired with solid fuels, in which there is an additional system for heat collection, it is recommended to maintain a forced turbulent flow in this type of heating systems and not to allow a temperature difference above 15-30 degrees between the oil and the oil film surrounding the heating element.
- Industrial cooling and heating installations. This product can be used even in systems with a capacity of several tens of thousands of liters.
Product Specifications
Product Specifications |
|
---|---|
Kinematic viscosity at 40°C in mm2/ s |
41,1 |
Kinematic viscosity at 100°C in mm2/ s |
6,1 |
Freezing point at 0C |
-13 |
Flash point at 0°C |
252 |
Coking residue % |
0,3 |
NOTE: The values presented are typical values and may differ from the actual product parameters. The actual parameters are presented in the quality certificates of each batch of products. Melkib s.c. does not take responsibility for their correctness.