Loctite 55 LT-55 metal and plastic pipe thread sealing cord, immediate sealing, easy to use, DVGW / KTW approvals, NSF / ANSI approval
Description
Properties
Loctite thread sealing cord is an excellent alternative to traditional methods of sealing pipe threads, such as bundles (hemp) or Teflon tape. The unique method of dispensing directly from the container greatly facilitates and speeds up the work. The product can be used on both metal and plastic threads. It has approvals for contact with drinking water, can be used in gas installations.
Benefits of using
- fast and reliable sealing of metal and plastic threads
- possibility of retracted thread up to 45 degrees
- temperature resistance up to 149 °C
- very easy application
- NSF/ANSI approval, Standard 61
- DVGW/KTW approval for installations with drinking water and gas
Use
Sealing of threaded connections of metal and plastic pipes in:
- installations with drinking water
- gas installations
- steam installations
- installations with non-aqueous liquids
Product Specifications |
|
---|---|
Colour |
white |
Chemical base |
polyamide cord with neutral paste |
Curing time |
does not require hardening |
Pressure resistance: 3/8 NPT steel pipe fittings |
up to 69 MPa |
Maximum thread size |
4" |
Operating temperature range |
up to +149 °C |
Instructions for use
- Clean the thread with a wire brush
- Hold the tip of the thread on the male thread, about two jumps from the end
- Cross-apply the cord to the thread. Quantity depends on thread size
- Assemble the connection
Storage
Store in dry and cool rooms at temperatures between +8ºC and 21°C. If the product is stored in a place where temperatures other than those recommended are present, the product may irreversibly lose all its properties. Do not put the remnants of the product back into the original packaging, as the entire product could become contamination.