Loctite MR 5922 200 ml black solvent sealant, for flanges, fittings and connections, flexible after evaporation, seals the joint
Description
Properties
Loctite MR 5922 is a solvent-based black paste, after evaporation it turns into a flexible coating. Contains fillers and resin. Suitable for sealing flange joints, connections, flexible structures. It increases the reliability of seals, in addition, it can be used to repair existing seals.
Benefits of using
- prolongs the life of seals
- prevents leakage
- slowly drys
- hardens when fixed
- especially recommended for sealing seals made of cork, metal, rubber or plastic in flexible structures
Product Specifications |
|
---|---|
Colour |
black |
Chemical base |
resin + fillers + alcohol |
Curing time |
4 h preliminary, 24 h total |
Operating temperature range |
-54 °C to +204 °C |
Instructions for use
- In order to achieve the best results, all surfaces should be cleaned and de-oiled, e.g. with Loctite 7063 remover, isopropyl alcohol can also be used.
- Evenly distribute the product on the surface in the form of a thin layer. Fit a gasket and apply a layer of product to it.
- Assemble the components and wait for drying
Storage
Store in dry and cool rooms at temperatures between +8ºC and 28°C. If the product is stored in a place where temperatures other than those recommended are present, the product may irreversibly lose all its properties. Do not put the residues of the product back into the original packaging, as the entire product could become contaminated.