Loctite PC 7117 black two-component epoxy coating with ceramic filler for metal parts to protect against abrasion by fine particles, for impellers, valves, housings
Description
Properties
Loctite PC 7117 is a two-component product that is designed to protect metal elements against abrasion by fine-grained particles. Creates a preventive coating. It is ideal for wear protection of equipment components such as impellers, butterfly valves, pump housings, cyclone dust collectors and tank linings. After curing, it forms a coating with high gloss and low friction. It is used for repair and protection of heat exchangers, capacitors, protection of tanks, dumps, bodies, valves or bodies of impeller pumps.
Benefits of using
- prevents abrasion of elements
- protects against harmful chemicals
- long opening time
Product Specifications |
|
---|---|
Colour |
black |
Chemical base |
epoxy |
Drying time |
3,5 h at 35 °C |
Shore hardness D |
85 |
Elongation at break |
290% |
Operating temperature range |
+110°C dry working environment, +60°C wet working environment |
Instructions for use
- For best results, clean and de-fat all surfaces with one of the Loctite removers
- Fill cavities in the surface and sand protruding irregularities
- Extract the surface
- Degrease and clean the surface
- Apply the preparation immediately before the surface begins to corrode or becomes dirty again
- More information about usage in the technical data sheet. You can also contact us for details
Storage
Store in dry and cool rooms at temperatures between +8ºC and 21°C. If the product is stored in a place where temperatures other than those recommended are present, the product may irreversibly lose all its properties. Do not put the remnants of the product back into the original packaging, as the entire product could become contamination.