Loctite SF 7023 400 ml x 12 pcs. transparent liquid spray cleaner, based on alcohol and hydrocarbons, removes deposits from resin, oil and varnish, for carburetors, valves, injectors, etc.
Description
High-quality, strong solvent-based product. The product quickly dissolves resin, oil and varnish deposits. LOCTITE SF 7023 is used to clean air intakes, carburetor parts, valves, actuators, EGR valves, injectors, idle speed regulators, throttles, air flow meters and plastic parts. The product evaporates 100% and leaves no residue.
Instructions for use
1. Shake the packaging before use.
2. Spray the product on the outside of the carburetor and wipe it with a clean, dry cloth.
3. Start the engine and let it run for a few minutes until it is hot.
4. Stop the engine, remove the air filter from the carburetor and spray product into the air intake for about 10 seconds.
5. Wait 3 minutes for the product to start working.
6. Start the engine and spray the product into the air intake again for another 30 seconds.
7. Allow the engine to run, increasing the speed occasionally until the engine runs smoothly.
NOTE: If the product is accidentally sprayed onto car paint, remove it immediately. The product may cause stains on wax or varnish.
Storage
Unless otherwise indicated on the product label, the ideal way to store it is to leave it in closed containers in a cool and dry room. Optimum storage temperature: + 8 ° C to + 21 ° C. Storage below + 8 ° C or above + 28 ° C may irreversibly change the properties of the product.