Loctite SI 5331 100 ml plastic thread sealant for plastic cold and hot water installations, NSF P1 approved
Loctite SI 5331 is recommended for sealing plastic threaded pipe joints in hot or cold water systems. Silicone cures by absorbing moisture from the environment at room temperature.
Product is NSF P1 certified for use near food processing places.
Product has an immediate sealing ability. The curing speed depends on the material, but the product requires a minimum of 40% air humidity (0.3 MPa) within 12 hours to achieve full sealing ability. Immediate sealing occurs at 0.05 MPa water pressure measured at the 25,4 mm fittings. Low temperatures do not reduce the effectiveness of this sealant if the atmospheric humidity is also low.
Benefits of use
- Food grade NSF
- for use on plastics
Unless otherwise indicated on the product label, the ideal way to store it is to leave it it in closed containers in a cool and dry place. Optimum storage temperature: + 8 ° C to + 21 ° C. Storage below + 8 ° C or above + 28 ° C may irreversibly change the properties of the product.