Mobilux EP 1 industrial grease, viscosity grade 1 18kg
Description
Mobilux EP 0, 1, 2, 3, 004 and 023 products form a family of four high-performance universal industrial greases and two semi-fluid greases for special applications. These greases, thickened with lithium hydroxystearate, are designed to provide superior protection against wear, rust and water. They are available in NLGI grades 00 to 3 with base oil viscosities of ISO VG 150 and 320.
Mobilux EP 0, 1, 2, and 3 greases are recommended for most industrial applications including heavy duty applications where high specific pressures and shock loads are present. These greases provide excellent protection against rust and corrosion and are resistant to water washout, making them particularly suitable for equipment operating in wet conditions. Mobilux EP 0 and 1 are used in centralized lubrication systems. Mobilux EP 2 and 3 are general purpose plastic greases. Recommended operating temperatures: -20 ° C to 130 ° C, but may be used at higher temperatures if the lubrication frequency is increased accordingly.
Usage
• Mobilux EP 0 and EP 1 offer good low temperature pumpability and are suitable for centralized lubrication systems and those applications where a grease with good low temperature performance is required.
• Mobilux EP 2 is recommended for universal use in rolling and friction bearings, bushings and pins under normal operating conditions.
• Mobilux EP 3 is a stiffer NLGI Grade 3 grease recommended for applications where maximum protection against the ingress of water or solid contaminants is required.
• Mobilux EP 004 and Mobilux EP 023 are particularly suitable for the lubrication of enclosed gears and bearings in poorly sealed gearboxes on underground mining machinery, with the exception of electric motor gears. Mobilux EP 004 and Mobilux EP 023 can also be used in many other industrial applications where conventional gear oils cannot be used in gearboxes, chain boxes, etc. due to leakage due to worn or missing seals.
Product Specifications |
|
---|---|
Viscosity class |
NLGI 1 |
Type of thickener |
Lithium |
Corrosion on copper,24h |
1A |
Drop point |
190 |
4 ball weld load |
250 |
4 ball test, wear scar diameter |
0.4 |
Penetration, 60 cycles |
325 |
Kinematic viscosity at 100°C |
14.8 |
Kinematic viscosity at 40°C |
160 |
Viscosity index |
91 |