Orlen Liten EP-2 800G plastic lithium grease for rolling bearings operating at high loads or shock loads, contains lithium soap, anticorrosive and antioxidant additives
Orlen LITEN EP-2
Lithium grease based on mineral oil, lithium soaps and with additives against oxidation, corrosion and lubricity. It has a viscosity of approximately 150mm2 at 40°C
- Lubrication of rolling bearings operating under heavy loads, or less loaded but exposed to shock loads. Operating temperatures from -20°C to +120°C. Temperature limits may vary depending on operating characteristics and replacement intervals.
- Intended for equipment with individual lubrication or with central lubrication, where it is required to pump grease over short distances.
DIN 51 502: KP2K-20
ISO 6743-9: BCHB-2
|Penetration after kneading at 250C||Mm/10||293|
|Penetration at -20°C||Mm/10|
|Structural stability: oil separation from grease 1200C/24h, (m/m)||%||0.6|
|Lubricity; weld load||kg||250|
|Base oil viscosity at 40°C||mm2/s||150|
NOTE: The presented values are typical and may differ from the actual parameters of the product. The actual parameters are presented in the quality certificates of each batch of products. The company Melkib s.c. does not take responsibility for their correctness.