Grease Shell Gadus S2 V220AD 2 NLGI 2 MoS2 (Retinax HDX 2) 0.4kg industrial bearing grease, oxidation stability, mechanical stability, corrosion resistance, seizing, wear, impact conditions
Product code: 550050009
Leave feedback on the product
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Related products
Secure purchase guarantee
Product description
Shell GADUS S2 V220AD 2 is an NLGI 2 bearing grease based on mineral oil, thickened with lithium-calcium soap and reinforced with solid anti-seize/EP additives. It delivers long-lasting protection under severe service, shock loads and wet conditions.
Benefits and key features
- Solid EP/AF additives – high shock-load resistance
- High adhesion – reduced loss and leakage
- Corrosion protection for rolling and plain bearings
- Mechanical and oxidative stability at elevated temperatures
- Water-resistant for operation in humid environments
Properties and applications
- Heavy duty: extends bearing life under vibration/shock (construction & agricultural equipment, fifth-wheel plates).
- Adhesion & stability: maintains consistency and limits leakage in service.
- Operating range: typically −25 °C to +120 °C, short-term up to +130 °C.
- Wet service: suitable for pumps, axles, trucks and bearings exposed to water and contaminants.
Technical parameters
| Parameter | Value |
|---|---|
| Consistency | NLGI 2 |
| Thickener type | Lithium-calcium |
| Base oil | Mineral |
| Kinematic viscosity (40 °C) | ≈ 220 mm²/s (ASTM D445) |
| Kinematic viscosity (100 °C) | ≈ 18 mm²/s (ASTM D445) |
| Worked penetration (25 °C) | 265–295 (0.1 mm) |
| Drop point | ≈ 175 °C (IP 396) |
| Four-ball weld load | 315–400 kg |
| Solid additives content | ≥ 3 % |
| Operating temperature | −25 °C to +120 °C (short-term +130 °C) |
| Colour / state | Black, semi-solid |
| Density (15 °C) | ≈ 1,000 kg/m³ |
| Water solubility | Insoluble |
| Vapour pressure (20 °C) | < 0.5 Pa |
| VOC | 0 % |
| CLP signal word | None (mixture not classified as hazardous) |
| Transport classification | Not regulated (ADR/IMDG/IATA) |
| Pack size | 0.4 kg |
Storage recommendations
Store in tightly closed, properly labelled containers in a cool, well-ventilated area at ambient temperature. Recommended packaging: mild steel or HDPE; avoid PVC. Protect from extremes and direct sunlight. Dispose of waste/used grease via authorised contractors.
FAQ
1) Typical applications?
Severely loaded bearings exposed to shocks and moisture; construction/agricultural equipment and fifth-wheel lubrication.
2) Operating temperature?
About −25 °C to +120 °C, short-term up to +130 °C.
3) Hazard classification?
Not classified as hazardous under CLP; may contain a sensitising component – avoid prolonged skin contact.
4) Transport regulated?
No – not regulated under ADR/IMDG/IATA.
5) VOC content?
0 %.
Product safety
Manufacturer
Shell Polska Sp. z o.o.
Al. Jerozolimskie 181 bud. B
02-222 Warszawa, Poland
Responsible person in the EU
Shell Polska Sp. z o.o.
Al. Jerozolimskie 181 bud. B
02-222 Warszawa, Poland
Reviews
If you've added a review and it doesn't appear on the list, it may be pending moderation.
Leave feedback on the product
Log in with Google
