


Teroson MS 930 GY 310 ml gray MS polymer one-component sealant - adhesive, thixotropic, good adhesion, flexible, UV and weather resistant, solvent free
Description
TEROSON MS 930 GY 310ML – Professional Grey Sealant and Assembly Adhesive Based on MS Polymers
TEROSON MS 930 GY is a one-component, thixotropic MS polymer-based assembly adhesive and sealant in grey color. It is applied using manual or pneumatic guns and cures through exposure to air moisture, forming a flexible, durable joint. Due to its UV and weather resistance, it is suitable for both indoor and outdoor use.
Applications of TEROSON MS 930 GY
- Bonding and sealing vehicle body parts
- Marine and railway industry – vibration-resistant flexible joints
- Electrical, HVAC, and ventilation installations
- Windscreen bonding – excellent adhesion to rubber materials, including EPDM
- Floor covering bonding in buses
Key Features and Benefits
- Free from solvents, isocyanates, silicones, and PVC
- Excellent adhesion to many substrates without primer
- UV and weather resistant
- Paintable after curing
- Non-sagging consistency – ideal for vertical application
- Forms permanently elastic and waterproof joints
Technical Specifications
Parameter | Value |
---|---|
Color | Grey (GY) |
Base | MS polymer |
Consistency | Thixotropic paste |
Density | approx. 1.5 g/cm³ |
Skin formation time | 10–40 minutes |
Curing speed | approx. 4 mm / 24 h |
Shore A hardness | approx. 30 |
Tensile strength | approx. 0.9 MPa |
Elongation at break | approx. 250% |
Stress at 100% elongation | 0.6 MPa |
Volume change | <2% |
Application temperature | 5°C to 40°C |
Service temperature range | -50°C to +80°C |
Short-term resistance | up to +120°C |
Storage Recommendations
TEROSON MS 930 GY 310ML should be stored in its original, tightly closed packaging, in a dry and cool place at temperatures between +10°C and +25°C. The product is not frost-sensitive. Shelf life is 12 months from the date of manufacture. Surfaces must be clean, dry, and degreased before application. Preliminary tests are recommended for best results.