TEROSON PU 8560 AC BO1L Glass Activator

TEROSON PU 8560 AC BO1L glass activator for surface preparation before windshield bonding

TEROSON PU 8560 AC BO1L is a surface preparation activator for glass and ceramic coatings before windshield bonding. The product is based on a solvent containing silanes and is used to clean and activate the bonding area before applying windshield adhesive.

The activator is designed for windshield bonding systems, especially where the process allows bonding without black glass primer. TEROSON PU 8560 AC BO1L helps prepare the adhesive bonding area properly, but it is not an adhesive and should not be used as a universal cleaner for the entire glass surface.

Application of TEROSON PU 8560 AC BO1L

TEROSON PU 8560 AC BO1L is used for cleaning and activating glass and ceramic coatings before windshield bonding. The product should be applied only in the area where the adhesive bead will be placed.

The activator is suitable for automotive glass installation and replacement work where surface pretreatment is required before applying polyurethane windshield adhesive. It can be used in workshops, automotive glass services and automotive applications, in accordance with the bonding technology specified by the adhesive manufacturer.

What makes TEROSON PU 8560 AC BO1L different

TEROSON PU 8560 AC BO1L contains silanes and is designed to activate surfaces before bonding. According to the manufacturer’s technical documentation, the product is free from chlorinated hydrocarbons, aromatic solvents and isocyanates.

An important advantage of the product is its short drying time. The adhesive may be applied after a minimum of 30 seconds after the activator has been applied, provided that the recommendations in the technical data sheet and the procedure specified for the particular windshield adhesive are followed.

When to choose TEROSON PU 8560 AC BO1L

Choose TEROSON PU 8560 AC BO1L when glass or ceramic coating must be prepared before windshield bonding without using black glass primer. It is intended for applications where controlled surface pretreatment and compliance with the windshield bonding system are important.

The activator is especially useful when the aim is to reduce the risk of problems caused by improper surface preparation, such as contamination in the bonding area, lack of surface activation or applying the adhesive too soon.

How to use TEROSON PU 8560 AC BO1L

TEROSON PU 8560 AC BO1L should be applied with a clean cloth to the glass or ceramic coating in the bonding area. After wet application, the surface must not be wiped off with a dry cloth. The product should be left to dry.

The adhesive may be applied after a minimum of 30 seconds after the activator has been applied. The maximum drying time specified in the TDS is 1 hour at 23°C and 50% relative humidity.

Important information before use

TEROSON PU 8560 AC BO1L is not intended for cleaning visible glass surfaces. The manufacturer indicates that reactive ingredients may cause spots or stripes after drying, so the product should be used only in the bonding area.

If the product contaminates a visible area, it should be removed immediately using a suitable pure solvent cleaner. Before use, always read the current Safety Data Sheet and the Technical Data Sheet of the adhesive with which the activator will be used.

Technical data of TEROSON PU 8560 AC BO1L

Storage

TEROSON PU 8560 AC BO1L should be stored in the original packaging at a temperature between 5 and 25°C. According to the TDS, the product is not frost sensitive and has a shelf life of 9 months in the original packaging.

FAQ

Is TEROSON PU 8560 AC BO1L a windshield adhesive?

No. TEROSON PU 8560 AC BO1L is not an adhesive. It is an activator for preparing glass and ceramic coatings before windshield bonding.

Can TEROSON PU 8560 AC BO1L be used without black glass primer?

Yes. According to the manufacturer’s documentation, the product is intended for cleaning and activating glass and ceramic coatings before windshield bonding without black glass primer. Always check the requirements of the adhesive used in the specific process.

How long should I wait before applying adhesive after TEROSON PU 8560 AC BO1L?

The adhesive may be applied after a minimum of 30 seconds after applying the activator. The manufacturer specifies a drying time of > 30 seconds and a maximum of 1 hour at 23°C and 50% relative humidity.

Should the surface be wiped with a dry cloth after applying the activator?

No. After wet application, the surface must not be wiped off with a dry cloth. The activator should be left to dry.

Can TEROSON PU 8560 AC BO1L be used to clean the entire windshield?

No. The product should be used only in the bonding area. It is not intended for cleaning visible glass surfaces because it may leave spots or stripes after drying.

Does TEROSON PU 8560 AC BO1L contain isocyanates?

According to the TDS, the product is free from isocyanates. Before use, always refer to the current Safety Data Sheet for detailed information on safe handling, labelling and transport.

TEROSON PU 8560 AC BO1L is a professional activator for preparing glass and ceramic coatings before windshield bonding in systems requiring controlled surface pretreatment.