Loctite 567 50 ml anaerobic thread sealant with Teflon, UL approved, price for 1 pc

Properties

Loctite 567 is a thread sealant based on a methacrylic resin. It is a low-strength product, which makes it easy to disassemble. The sealant is intended for common threads up to M80 / R3. Hardening occurs after contact with metal in the absence of air. The thread sealant is resistant to low temperatures - the range is -55ºC to 150ºC. The product is UL approved.

Benefits of using

• easy to disassemble when needed
• resistant to low temperatures
• instant low pressure seal
• one-component product - no need to mix and purchase additional accessories
• High viscosity - no sag
• does not shrink or block installation
• vibration resistant
• oil resistant
• prevents galling of stainless steel
• fits tightly, prevents loosening of threads

Usage

Loctite 567 Thread Sealant is a product designed to quickly seal common metal threads. The product is recommended for industrial applications in the chemical industry, refineries, industry and maritime transport, the automotive industry and various industrial equipment.

Technical data

Instructions for use

1. In order to achieve the best results, clean and degrease all surfaces with the remover Loctite 7063 . Accurate degreasing is essential for the correct gluing of the elements.
2. In case the material is inactive metal or the product hardens too slowly, spray LOCTITE® SF 7471 ™ or LOCTITE®
   SF 7649 ™ and allow to dry.
3. Apply a drop of product to the male thread leaving the first thread free. Rub thread sealant into threads to fill voids. For larger threads and spaces, apply more product accordingly, also on female threads.
4. Tighten the thread using a wrench.
5. Correctly tightened threads will seal immediately, but allow a minimum of 24 hours to dry for complete resistance to pressure and solvents.

Storage

Store in dry and cool rooms. The recommended temperature is between + 8ºC and + 21 ° C. Storage outside the recommended temperature range may irreversibly change the properties of the product. Residual material should not be returned to packaging as this may contaminate the product.