On the production floor, time is lost not only during major breakdowns. Losses also occur when an operator has to leave the workstation to collect wiping material, look for the right product or interrupt work to dispose of used wipes.
The TORK “Efficient Production Line” promotion helps organise workstations using W1, W2 and W4 dispensers. When the campaign conditions are met, promotional rental prices for selected models start from PLN 1 net.
Key information about the TORK promotion
- The promotion runs from 1 January to 31 December 2026.
- Promotional rental prices apply when at least 5 dispensers from the promotional list are rented at the same time.
- The promotion includes TORK solutions from the W1, W2 and W4 systems.
- The rental price depends on the dispenser item number and is PLN 1, PLN 9 or PLN 29 net.
- Dispensers can help reduce unnecessary movement, organise access to wiping materials and limit excessive consumption.
See TORK dispensers included in the promotion
Who is this promotion for?
The solution is intended for companies that want to improve workstation organisation, reduce material waste and speed up everyday work without redesigning the entire production process.
- Production and assembly: wiping material is available exactly where contamination occurs.
- Maintenance and service: easier removal of oils, greases, coolants and typical technical contamination.
- Warehousing and packing: faster response to spills and better organisation of consumable materials.
- Lean and 5S plants: reduced unnecessary movement and a standardised method of dispensing wiping materials.
Less unnecessary movement means more time for productive work
According to TORK materials, operators may interrupt their work more than 20 times during a single shift simply to collect or dispose of cleaning products. Each interruption is short, but across an entire shift, team and production plant, these movements can create a noticeable loss of working time.
One of the simplest improvements is to position the right dispenser as close as possible to the place where contamination occurs. Wiping material is then always within reach and dispensing becomes organised and repeatable.
Three ways to make industrial cleaning faster and better organised
1. Keep wiping material where it is actually used
A correctly positioned dispenser reduces walking, searching for materials and taking extra wiping material “just in case”. Operators have quick access to the required amount without unnecessary interruptions.
2. Match the wiping material to the contamination
Removing oil may require a different material than wiping heavy grease or performing precision cleaning of machine components. TORK states that solutions using exelCLEAN® technology can shorten selected cleaning tasks by up to 35%. The actual result depends on the type of contamination, the selected wiping material and workstation organisation.
3. Control dispensing and reduce waste
Controlled dispensing helps reduce unnecessary material consumption and the number of unused or excessive sheets being discarded. TORK also states that selected compressed solutions can occupy up to 80% less space than comparable non-compressed solutions, helping to simplify storage and replenishment.
“Efficient Production Line” promotion terms
- Promotion period: from 1 January to 31 December 2026. The agreement must be accepted no later than the final day of the promotion.
- Minimum number of dispensers: promotional rental prices apply when at least 5 dispensers from the promotional list are rented at the same time, in any combination.
- Rental price: depends on the selected dispenser item number and starts from PLN 1 net.
| Dispenser item number | Promotional rental price – net |
|---|---|
| 652008 | PLN 29 |
| 652000 | PLN 29 |
| 652108 | PLN 9 |
| 652100 | PLN 9 |
| 653008 | PLN 9 |
| 653000 | PLN 9 |
| 654008 | PLN 1 |
| 654000 | PLN 1 |
TORK dispensers included in the promotion
Select the model you are interested in and open its product page. If you are not sure which system will work best, tell us how many workstations you have, what type of contamination you deal with and where the dispensers will be installed. We will help select a solution for the actual working conditions.
W1 system – floor stands and wall-mounted dispensers
The W1 system is intended for wiping materials supplied in large rolls. Depending on workstation organisation and available space, it can be used with floor-standing or wall-mounted dispensers.
...
...
W2 system – centre-feed roll dispensers
W2 solutions allow wiping material to be dispensed from the centre of the roll. They are useful where quick access and controlled material dispensing are important.
...
W4 system – dispensers for folded or pre-cut wiping materials
The W4 system allows individual sheets to be dispensed in an organised and hygienic way. It helps protect the remaining material against contamination and can limit taking more wiping material than is actually needed.
...
Tork Workflow™ – when you want to improve the whole process
Tork Workflow™ is an approach based on analysing workstations and recommending improvements to cleaning organisation. The objective is to identify places where operators lose time, use excessive amounts of material or do not have easy access to the correct wiping solution.
Such an analysis can provide a starting point for improving dispenser placement, matching wiping materials to specific contamination and standardising cleaning procedures across multiple workstations.
Want to use the TORK promotion?
Tell us the number of workstations, type of contamination, approximate wiping-material consumption and where the dispensers should be positioned or installed. We will help select the appropriate system and guide you through the rental process.
Email: [email protected]
Phone: +48 509 336 666
You can also use the chat available in the lower-left corner of the website. The chat is available Monday to Friday, 8:00–15:00.
FAQ – TORK “Efficient Production Line” promotion
Does the PLN 1 net rental price apply to every dispenser?
No. The price depends on the dispenser item number and is PLN 1, PLN 9 or PLN 29 net. The individual rates are shown in the table above.
What condition must be met to use the promotion?
You must rent at least 5 dispensers from the promotional list at the same time, in any combination. The agreement must be accepted during the promotion period.
What is the difference between TORK W1, W2 and W4?
W1 includes solutions for wiping materials in large rolls, including floor stands and wall-mounted dispensers. W2 is intended for centre-feed rolls, while W4 is designed for folded or individually dispensed wiping materials. The choice depends on the type of work, contamination, available space and preferred dispensing method.
What information do you need to recommend the right dispenser?
The most important information is the number of workstations, type of contamination, current wiping-material consumption and the place where the dispenser will be installed. It is also useful to know whether employees clean large surfaces, machine components or small precision parts.
Does the promotion make sense for a small number of workstations?
It can, especially if employees currently lose time walking to collect wiping material or regularly take more than they need. However, the promotional condition requiring the simultaneous rental of at least 5 dispensers still applies.
Can Melkib also help select the right wiping material?
Yes. The dispenser and wiping material should be treated as one system. Based on the type of contamination and cleaning tasks, we can help select both the dispensing method and the appropriate wiping material.
Until when is the promotion available?
The promotion runs from 1 January to 31 December 2026. The agreement must be accepted no later than the final day of the campaign.
Log in with Facebook
Log in with Google