COX AirFlow 2 pneumatic gun for sausages and foil packs 600 ml

COX AirFlow 2 pneumatic gun for sausages and foil packs 600 ml

COX AirFlow 2 pneumatic gun for sausages and foil packs 600 ml is a professional dispenser for one-component adhesives, silicones and sealants supplied in flexible foil packaging. In everyday use, these packs are often called sausages, sachets or foil packs. The AirFlow 2 model is designed for 310 ml, 400 ml and 600 ml packaging.

This tool is suitable wherever manual dispensing becomes tiring and the application needs to be smooth, repeatable and well controlled. The pneumatic drive supports stable material flow, while the quick exhaust valve helps reduce unwanted material run-on after the trigger is released.

Application of the COX AirFlow 2 pneumatic gun

COX AirFlow 2 is designed for applying sealing and bonding materials supplied in foil packs of 310 ml, 400 ml and 600 ml. It can be used for sealing, bonding, joint filling and installation work where materials in sausage-type or sachet-type packaging are used.

The gun is suitable for workshops, production areas, service teams, construction work, joinery, window and door installation, facade work and other applications where comfortable dispensing of larger material packs is required without excessive operator fatigue.

What makes COX AirFlow 2 different

The main advantage of COX AirFlow 2 is its pneumatic dispensing mechanism. The operator does not have to squeeze the material manually, which is important during longer bead applications, frequent dispensing or work requiring stable pressure.

The model is equipped with a 6.8 bar pressure regulator and a quick exhaust valve. This makes it easier to control the amount of material dispensed, reduce waste and keep the working area cleaner after finishing the application.

When to choose COX AirFlow 2 for sausages and foil packs

This model is a good choice if you use adhesives, silicones or sealants in 310 ml, 400 ml or 600 ml foil packs and need a more comfortable dispensing method than a manual gun. It is especially useful for regular work, longer applications and tasks requiring repeatable dosing.

COX AirFlow 2 is intended for users who want to reduce hand fatigue, improve material flow control and work more efficiently with 600 ml packaging.

AirFlow 2 compared with AirFlow 1

COX AirFlow 2 DP1C 600-SA-145-201 is the newer generation of a pneumatic gun for the same application as COX AirFlow 1 DP1C 600-SA-145-101. Both models work with 310 ml, 400 ml and 600 ml foil packs, have a dispensing force of 1.45 kN and operate at a maximum pneumatic pressure of 6.8 bar.

If you are comparing both products, the main difference is the tool generation. AirFlow 1 and AirFlow 2 are designed for a similar task: pneumatic application of materials packed in sausages, sachets and foil packs.

Related product

[product id="5230"]

What to check before use

Before purchasing and using the tool, make sure that the adhesive, silicone or sealant is supplied in a flexible foil pack, also commonly called a sausage or sachet. This variant should not be treated as a Combi gun, so it should not be assumed to work with standard cartridges unless confirmed by the documentation of the specific variant.

It is also important to choose the correct nozzle for the bead width and the type of material being applied. Pressure should be adjusted gradually to obtain a stable flow without excessive dispensing.

How to use the COX AirFlow 2 gun

Place the foil pack with the material inside the gun barrel and fit the correct application nozzle. Then connect the pneumatic supply and adjust the working pressure to achieve controlled material flow.

During application, guide the gun evenly along the joint. After finishing, release the trigger so that the quick exhaust valve can help reduce further material flow. After work, remove adhesive, silicone or sealant residues from the parts that may come into contact with the material before it cures.

Technical data of COX AirFlow 2 DP1C 600-SA-145-201

Storage

Store the gun in a dry and clean place, away from moisture, dust and dirt that could enter the barrel or pneumatic components. After use, clean off adhesive, silicone or sealant residues and check that the nozzle and application parts are not blocked.

FAQ

Does COX AirFlow 2 fit 600 ml sausages?

Yes. COX AirFlow 2 DP1C 600-SA-145-201 is designed for 310 ml, 400 ml and 600 ml foil packs, which are commonly called sausages, sachets or foil packs.

Is this gun suitable for cartridges?

This variant is intended for foil packs, meaning sausages and sachets. If you need a tool for both cartridges and foil packs, choose the correct Combi model.

What is the difference between COX AirFlow 2 and COX AirFlow 1?

COX AirFlow 2 is the newer generation of the tool. COX AirFlow 1 DP1C 600-SA-145-101 and COX AirFlow 2 DP1C 600-SA-145-201 are designed for the same application, have a dispensing force of 1.45 kN and operate at a maximum pressure of 6.8 bar.

What materials can be applied with COX AirFlow 2?

The gun is used for applying one-component adhesives, silicones and sealants supplied in foil packs. The technical data sheet of the applied material determines which substrates and surfaces the material is suitable for.

What is the quick exhaust valve used for?

The quick exhaust valve helps reduce material run-on after the trigger is released. This makes it easier to control the application, reduce waste and keep the bead cleaner.

Does a pneumatic gun reduce operator fatigue?

Yes. Pneumatic dispensing reduces hand effort compared with a manual gun, especially during longer work or frequent application of 600 ml packs.

COX AirFlow 2 DP1C 600-SA-145-201 is a pneumatic gun for 600 ml sausages and foil packs, designed to support smooth application of adhesives, silicones and sealants with less operator effort.