CRC BRAKLEEN PRO 500 ml – brake and clutch cleaner and degreaser
Product code: 1031696
Leave feedback on the product
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Secure purchase guarantee
Opis produktu
CRC BRAKLEEN PRO is a chlorine-free solvent mixture for fast cleaning and degreasing of brake and clutch components. It removes brake fluid, grease, oil and other contamination.
The aerosol features a 360° valve and an extension tube for easier application. The propellant is non-flammable carbon dioxide; the can contains 97% active product.
APPLICATION
For cleaning and degreasing:
- brake linings,
- drums,
- cylinders,
- brake pads,
- brake discs,
- springs,
- shoes,
- clutch discs,
- equipment,
- parts and tools.
BENEFITS
- Effectively removes brake fluid, grease, oil and hard deposits.
- Degreases rapidly and evaporates quickly; leaves no residue.
- Reduces brake squeal and clutch vibration.
- Can be used without dismantling, reducing repair time and costs.
- Low surface tension allows excellent penetration and provides effective degreasing.
- Leaves no residue and does not cause corrosion on metal surfaces.
- Safe for most plastics, coatings and rubber; test before use.
- The 360° valve and tube make aerosol application easier.
TECHNICAL DATA
| Property | Value |
|---|---|
| Appearance | Colourless liquid |
| Specific gravity (20°C) | 0.72 g/cm³ |
| Boiling range | 55–120°C |
| Vapour density | 3 |
| Freezing point | < −30°C |
| Evaporation rate (ether = 1) | 2.8 |
| Flash point | < 0°C |
| Surface tension (20°C) | 21 mN/m |
| Non-volatile components | None |
INSTRUCTIONS
- Apply generously to the surface and allow the excess to run off. Dry with air or a cloth. Repeat if necessary.
- Use the extension tube for hard-to-reach areas.
- If necessary, lubricate again after use with CRC 5-56.
LIMITATIONS AND SAFETY
- Before use, check that the product does not damage plastics or rubber.
- Do not use on sensitive electronics. Use one of the electronic cleaners for these applications.
- Ensure adequate ventilation.
- Do not clean equipment while it is energised.
- Allow the parts to dry thoroughly and the area to ventilate before restarting the engine.
Reviews
If you've added a review and it doesn't appear on the list, it may be pending moderation.
Leave feedback on the product
