CRC FAST DRY DEGREASER, fast-drying degreaser aerosol, 500 ml
Product code: 1030078
Leave feedback on the product
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Secure purchase guarantee
Opis produktu
CRC FAST DRY DEGREASER is a fast-evaporating, powerful degreasing cleaner in an aerosol. It contains no 1,1,1-trichloroethane or other chlorinated solvents. It quickly penetrates dirt and deposits, helping improve machine operation.
The product is intended for applications where the use of flammable solvents is permitted. 500 ml aerosol; the documentation specifies a pack of 12 × 500 ml.
APPLICATION
- Gearboxes
- Chains and cables
- Moulds and dies
- Compressors and pumps
- Motors and pneumatic tools
- Brakes and clutches
- Conveyors
- Parts and tools
BENEFITS
- Quickly dissolves fats, oils, greases, tar and adhesives, and effectively removes deposits.
- Evaporates quickly to reduce downtime and allow equipment to be restarted promptly.
- Leaves no residues or stains; it is stable and does not cause corrosion.
- Safe for most plastics, coatings and rubber, subject to testing before use.
- The 360° valve allows use in an inverted position; the extension tube makes application easier.
- The aerosol is filled with non-flammable carbon dioxide (CO₂); the can contains 97% active product.
TECHNICAL DATA
| Parameter | Value |
|---|---|
| Appearance | Colourless liquid, characteristic odour |
| Specific gravity (at 20°C) | 0.716 g/cm³ |
| Boiling point | 55–120°C |
| Vapour density (air = 1) | 3 |
| Freezing point | < -30°C |
| Evaporation rate (ether = 1) | 2.8 |
| Flash point (closed cup) | <0°C |
| Dynamic viscosity (at 20°C) | 0.5 mPa·s |
| Surface tension (at 25°C, approx.) | 21 mN/m |
| Compatibility with plastics | Test before use (*) |
| Non-volatile content | None |
INSTRUCTIONS
- Apply liberally and allow excess product to run off. Dry with air or an absorbent cloth. Repeat if necessary.
- Use the extension tube to reach inaccessible areas.
- After cleaning, use CRC 3-36 for protection and lubrication.
LIMITATIONS AND SAFETY
- Before use, check that the product does not damage the plastic being cleaned. Delicate plastics such as polystyrene and polycarbonate must be tested before use, particularly where thermal or mechanical stress is present.
- Do not use on delicate electronic equipment such as tape recorders, players and computers. Use CRC precision cleaners for these applications.
- Ensure adequate ventilation. Do not use on equipment that is live. Dry equipment thoroughly before switching it on.
- Use only where flammable solvents are permitted.
Reviews
If you've added a review and it doesn't appear on the list, it may be pending moderation.
Leave feedback on the product
