Conductive rubber pads for remotes 100 pcs with 8g silicone adhesive – repair kit for membrane keyboards and remote controls

Termopasty Rubber Pads for Remote Controllers 100 pcs with 8 g silicone adhesive

Termopasty Rubber Pads for Remote Controllers 100 pcs with 8 g silicone adhesive is a repair kit designed to restore worn buttons in remote controls, calculators, control panels and other devices equipped with rubber keypads. The product helps restore proper button response and reduce problems such as delayed operation or the need to press keys very hard.

The ART.AGT-021 kit contains 100 conductive rubber pads and 8 g of silicone adhesive in a zip-lock bag. The pads are made of flexible and durable silicone, and their standard dimensions make them suitable for many remote control models and other electronic devices with keypads.

Applications of Termopasty Rubber Pads for Remote Controllers

Termopasty Rubber Pads for Remote Controllers are intended for repairing buttons in TV and RTV remote controls, calculators and control panels. They can be used wherever a worn conductive layer on a button causes poor device response, delays or lack of contact after pressing a key.

The product is suitable for electronics servicing, repair workshops and restoring everyday devices. The kit is especially useful when the electronic circuit of the device works correctly and the problem is caused by worn conductive elements in the rubber keypad.

What distinguishes Termopasty Rubber Pads for Remote Controllers 100 pcs

The rubber pads provide excellent electrical conductivity and are flexible and durable. With a diameter of 4 mm and a thickness of 0.5 mm, they can be adapted to many types of remote controls and devices with rubber keypads. The included silicone adhesive makes it possible to attach the new pad in place of the worn element.

The manufacturer indicates that after application the device should be left unused for 24 hours to allow the adhesive to dry fully and create a secure bond. After this time, the device can be used again.

When to choose the ART.AGT-021 kit

The ART.AGT-021 kit is worth choosing when a remote control, calculator or control panel only works after strong pressure, reacts with a delay or some buttons stop working despite correct batteries and a functional electronic circuit. In many cases, the cause is a worn conductive rubber pad, which can be replaced without replacing the entire device.

The 100 pcs package is practical both for service departments and users who want to keep spare pads for several repairs. The included silicone adhesive eliminates the need to choose a separate adhesive for installation.

How to use Termopasty Rubber Pads for Remote Controllers

Remove the worn rubber pad, trimming it by about 1 mm. Then apply a small amount of silicone adhesive to the new pad and place it in the correct position on the button. Gently press the pad to create proper contact.

After installation, leave the device unused for 24 hours to allow the adhesive to dry completely. After this time, the remote control, calculator or control panel can be used again.

Technical data of Termopasty Rubber Pads for Remote Controllers 100 pcs

Storage

Store in dry, well-ventilated areas, away from heat sources, ignition sources and direct sunlight.

FAQ

Does ART.AGT-021 include silicone adhesive?

Yes. The current manufacturer kit ART.AGT-021 includes 100 conductive rubber pads and 8 g of silicone adhesive in a zip-lock bag.

What are rubber pads for remote controllers used for?

They are used to restore worn buttons in remote controls, calculators, control panels and other devices with rubber keypads.

What dimensions do Termopasty rubber pads have?

Each pad has a diameter of 4 mm and a thickness of 0.5 mm, which makes it suitable for many types of devices.

Are the pads suitable only for RTV remote controls?

No. The manufacturer also indicates applications in calculators, control panels and other electronic devices equipped with keypads.

How should a new conductive pad be installed?

Remove the worn pad by trimming it by about 1 mm, apply a small amount of silicone adhesive to the new pad, place it on the button and press gently.

How long does the silicone adhesive dry?

After installation, leave the device unused for 24 hours so that the adhesive can dry completely and create a secure bond.

Is the product intended for professional use?

Yes. The manufacturer’s technical data sheet states that the product is restricted to professional users and the safety data sheet should be read carefully before use.