Divinol Fett L 800 lithium grease NLGI 000 for DMG MORI rotary tables 1 l
Product code: 26490LK-T090
Leave feedback on the product
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Related products
Secure purchase guarantee
Product description
Divinol Fett L 800 – specialist grease for rotary tables and machine tool guideways
Divinol Fett L 800 is a specialist lithium soap-based grease developed for lubricating linear guideways and rotary table bearings in selected machine tools. Its high base oil viscosity helps reduce stick-slip, i.e. irregular movement caused by alternating sticking and sliding of mating components.
The product has a very fluid NLGI 000 consistency. This enables good flow to the lubrication point and, according to the manufacturer, provides better return-flow behaviour than comparable NLGI 00 greases. Divinol Fett L 800 can also be used for mechanically highly loaded gears.
Applications of Divinol Fett L 800
Divinol Fett L 800 is primarily intended for lubricating rotary table bearings in machining centres and linear guideways in selected machine tools.
It can also be used in mechanically highly loaded gears where high load-carrying capacity, wear protection and reliable lubricant flow are required.
The manufacturer Zeller+Gmelin specifies DMGMoriSeiki approval for Divinol Fett L 800.
What distinguishes Divinol Fett L 800
Reduction of stick-slip – the high base oil viscosity helps prevent jerky movement of guiding and rotating components.
Very fluid NLGI 000 consistency – facilitates lubricant flow and distribution within the lubrication system.
High load-carrying capacity – the four-ball welding load VKA reaches 4400 N.
Wear protection – the formulation is designed for mechanically loaded machine components.
Resistance to water and oxidation – supports stable lubricant performance in industrial operating conditions.
Corrosion protection – the grease provides protective properties for lubricated machine components.
When to choose Divinol Fett L 800
Divinol Fett L 800 should be considered particularly when the machine manufacturer or technical documentation specifies this lubricant, or when the application requires a very fluid NLGI 000 grease with high base oil viscosity and good flow to the lubrication point.
This is a specialist machine lubricant intended for defined applications. When changing from another grease, always verify the machine manufacturer's requirements and the compatibility of the previously used lubricant.
Technical data of Divinol Fett L 800
| Parameter | Value |
|---|---|
| Manufacturer | Zeller+Gmelin |
| Manufacturer article number | 26490 |
| Melkib product code | 26490LK-T090 |
| Packaging | 1 l |
| Colour / appearance | Yellowish |
| Thickener | Lithium soap |
| NLGI grade according to DIN 51818 | 000 |
| Operating temperature range | -20°C to +120°C |
| Base oil viscosity at 40°C according to ASTM D 7042 | 750 mm²/s |
| Dropping point according to DIN ISO 2176 | 160°C |
| Unworked penetration according to DIN ISO 2137 | 450 × 0.1 mm |
| Worked penetration after 60 double strokes according to DIN ISO 2137 | 460 × 0.1 mm |
| Copper corrosion 24 h / 100°C according to DIN 51811 | Corrosion grade 1 |
| Four-ball welding load VKA according to DIN 51350-4 | 4400 N |
| Classification according to DIN 51826 | GPF 000 K-20 |
| Classification according to ISO 6743-9 | ISO-L-XBCHB 000 |
| Machine manufacturer approval | DMGMoriSeiki |
| Density at 15°C | 0.91 g/cm³ |
| Flash point | >250°C |
| CLP classification | The mixture is not classified as hazardous according to Regulation (EC) No 1272/2008 |
| ADR / IMDG / IATA transport classification | Not classified as dangerous goods for transport |
Storage
Store Divinol Fett L 800 in a tightly closed container in a cool and well-ventilated place. Protect from frost, excessive heat and direct sunlight.
FAQ – Divinol Fett L 800
What is Divinol Fett L 800 used for?
The product is primarily intended for lubricating linear guideways and rotary table bearings in selected machine tools. It can also be used for mechanically highly loaded gears.
Is Divinol Fett L 800 suitable for DMG MORI machines?
The manufacturer Zeller+Gmelin specifies DMGMoriSeiki approval for this product. Before use, however, always verify the lubrication requirements for the specific machine model and lubrication point.
What does NLGI 000 mean?
NLGI 000 indicates a very fluid grease consistency. In Divinol Fett L 800, this supports good lubricant flow to the working area. According to the manufacturer, the product provides better return-flow behaviour than a comparable NLGI 00 grease.
Does Divinol Fett L 800 reduce stick-slip?
Yes. According to the manufacturer, the high base oil viscosity helps effectively reduce stick-slip during movement between mating surfaces.
Can Divinol Fett L 800 be used in gears?
Yes. The manufacturer also specifies the product for mechanically highly loaded gears.
Can Divinol Fett L 800 be mixed with another grease?
When changing lubricants, compatibility between different products should not be assumed automatically. Check the machine manufacturer's requirements and the compatibility of the existing and new lubricants before changing grease.
Product safety
Manufacturer
Zeller+Gmelin Sp. Z o.o
Wiejska 59
55-095 Mirków, Poland
Responsible person in the EU
Zeller+Gmelin Sp. Z o.o
Wiejska 59
55-095 Mirków, Poland
Reviews
If you've added a review and it doesn't appear on the list, it may be pending moderation.
Leave feedback on the product
Log in with Google
