Double-sided acrylic mounting tape, transparent, 2 mm x 8 mm, 16.5 m, clean non-adhesive edges
Product code: MB-0215
Leave feedback on the product
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Secure purchase guarantee
Product description
Double-sided transparent acrylic mounting tape 2 mm x 8 mm, 16.5 m with clean, non-adhesive edges is a high-strength tape for permanent bonding. It offers excellent adhesion to metal, glass and most plastics, replacing screws, rivets, welds and many liquid adhesives.
Benefits and unique features
- Fully transparent, double-sided acrylic tape with high strength
- Clean non-adhesive edges – less edge contamination and easier handling
- Good adhesion to metal, glass and most plastics
- Moisture-resistant – suitable for indoor and outdoor use
- Handles high loads and enables neat, invisible joints
- Replaces mechanical fasteners (screws, blind rivets) and welds
Properties and applications
- Decor and covers: trims, panels, signs and display parts without visible fixings.
- Smooth-surface bonding: glass-to-metal, glass-to-plastic, metal-to-plastic (after degreasing).
- DIY and service: quick fixes of plastic parts, accessory mounting.
- Industrial use: fastening components in production where clean, transparent bonds are required.
Technical parameters
| Parameter | Value |
|---|---|
| Type | double-sided transparent acrylic foam tape |
| Adhesive | acrylic |
| Carrier | acrylic foam |
| Thickness | 2.00 mm |
| Width | 8 mm |
| Roll length | 16.5 m |
| Peel adhesion (25 mm) | approx. 29–37 N/25 mm* |
| Max. service temperature | 93 °C (short-term up to 150 °C) |
| Moisture resistance | yes |
| Colour | transparent |
| Edges | clean, non-adhesive |
* Value depends on substrate, surface preparation and bond cure time.
Storage recommendations
Store in the original sealed packaging in a dry, clean place, away from UV. Recommended storage temperature: 10–25 °C. Degrease and dry substrates before bonding; apply uniform pressure to ensure full contact.
FAQ
1) Is it suitable outdoors?
Yes, it resists moisture and can be used both indoors and outdoors.
2) Best substrates?
Metal, glass and most plastics—clean and degrease before use.
3) Thermal resistance?
Up to about 93 °C in continuous use (short-term up to 150 °C).
4) Why non-adhesive edges?
They attract less dust and keep edges clean for a neater finish.
5) Can it replace mechanical fasteners?
In many applications yes—creates clean, invisible bonds without drilling.
Product safety
Responsible person in the EU
Option Tapes Specialties N.V.
Frankrijkstraat 8
9140 Temse, Belgium
Reviews
If you've added a review and it doesn't appear on the list, it may be pending moderation.
Leave feedback on the product
Log in with Google
