Emulsol RN-1 20l washing agent, degreasing for metals, plastics and rubber, removes oils, greases and residues from paint shops and electroplating plants
Cleaning product designed to clean metals from oil impurities, greases, residues after processing in powder coating plants, electroplating plants, metal haberdashery workshops and removing all kinds of impurities from other hard surfaces. It is great for cleaning steel, cast iron, non-ferrous metals, aluminum, zinc, galvanized steel, plastics, rubber elements.
- cleaning and degreasing of aluminum, steel, cast iron, non-ferrous metals, zinc, galvanized steel, plastics, rubber
- removes grease and oils
Emulsol RN extra is a composition of detergents, emulsifiers and corrosion inhibitors. Has the PZH certificate
Density (at 20°C) g/ml
Solubility in water
Instructions for use
Washing methods: immersion, spraying, hand washing. The best results are achieved by using a bath temperature of 70-80°C and a concentration of 0.5-3%. The use of the agent at room temperature may cause a less effective effect, therefore, in order to achieve the desired effect, the concentration of the washing solution should be increased. For various applications, the customer should choose the optimal working conditions of the bath based on their needs. Washed surfaces should be dried, preferably in a stream of warm air, or wiped. After using the preparation, traces of corrosion retardant inhibitor remain on the surface. The residue of inhibitors, unless they are present on the surface in excess, does not adversely affect the adhesion of the varnish. In any case, washed surfaces should be dried, preferably in a stream of warm air.
NOTE: The values presented are typical values and may differ from the actual product parameters. The actual parameters are presented in the quality certificates of each batch of products. Melkib s.c. does not take responsibility for their correctness.