Fischer injection mortar FIS V 360 S, hybrid anchoring resin for concrete and masonry, fast curing, high load capacity
Product code: 00561056
Leave feedback on the product
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Related products
Secure purchase guarantee
Product description
The injection mortar “Fischer Injection Mortar FIS V 360 S” is a universal two-component anchoring system for concrete and masonry. Its hybrid formulation delivers high load capacity, fast curing and safe installation across a wide range of applications.
Benefits and unique features
- Universal use: cracked and non-cracked concrete as well as various masonry materials.
- High temperature resistance up to 120 °C after curing.
- Short working time with predictable curing — efficient job progress.
- Low shrinkage for tight hole filling.
- Easy cartridge application; work can be resumed after replacing the static mixer.
Properties and applications
- Anchoring threaded and reinforcing bars: for structural fixings, machines, railings and brackets.
- Concrete and masonry works: suitable for drilled holes in concrete and in solid or hollow bricks (with sleeves).
- Wide temperature range: stable performance and resistance to water and UV after curing.
- Repair & retrofit: rebar dowelling, masonry repairs, edge-close fixings (follow the installation guide).
Technical parameters
| Parameter | Value |
|---|---|
| Colour (mixed) | Grey |
| Density | 1.6–1.8 g/cm³ (20 °C) |
| Viscosity (Brookfield, 20 °C) | approx. 110–150 Pa·s |
| Open time | approx. 5 min (10–20 °C) |
| Curing time | approx. 60 min (10–20 °C) |
| Temperature resistance after curing | up to 120 °C |
| Shrinkage | < 0.9 % |
| Shore A hardness | approx. 83 (after 45 min) |
| Thermal conductivity | 0.73 W/m·K |
| Contact resistivity | 1.8 × 1012 Ω·cm |
| Shelf life | up to 18 months |
Storage recommendations
Store in a dry, cool and well-ventilated place at 5–25 °C. Protect from direct sunlight and heat sources. Do not freeze. After partial use, the cartridge can be reused once the static mixer is replaced.
FAQ
1) What substrates is the mortar suitable for?
Concrete (cracked and non-cracked) and many masonry materials when used with the correct accessories.
2) What is the typical curing time?
About 60 minutes at 10–20 °C.
3) Is it water-resistant after curing?
Yes — after curing it is resistant to water and outdoor exposure.
4) How should unopened cartridges be stored?
At 5–25 °C in the original packaging, no longer than the stated shelf life.
5) Can I pause the work and continue later?
Yes — simply replace the static mixer and continue application.
Product safety
Manufacturer
FISCHER POLSKA SPÓŁKA Z OGRANICZONĄ ODPOWIEDZIALNOŚCIĄ
Albatrosów 2
30-716 Kraków, Poland
Responsible person in the EU
FISCHER POLSKA SPÓŁKA Z OGRANICZONĄ ODPOWIEDZIALNOŚCIĄ
Albatrosów 2
30-716 Kraków, Poland
Reviews
If you've added a review and it doesn't appear on the list, it may be pending moderation.
Leave feedback on the product
Log in with Google
