Hydraulic oil L-HM / HLP 46 Orlen 1000l loaded power transmission systems, hydraulic controls, difficult working conditions, elevated temperature, anti-wear, anti-corrosive, anti-oxidant
Product code: QFS162Z10
Leave feedback on the product
Related products
Select product variant:
Individual variants may differ in price
Secure purchase guarantee
Product description
L-HM / HLP 46 hydraulic oil properties
- Hydraulic oil used in hydrostatic systems
- Manufactured on the basis of very good quality bases with the addition of enriching substances and improving its anti-corrosion and anti-wear properties. The unique composition allows extending the service life and reducing the wear of components in the systems
- Available packages: 20l, 205l and Mauser 1000l (individual pricing)
Use of L-HM / HLP 46 hydraulic oil
- Highly loaded power transmission systems as well as hydraulic drive and control
- Hydraulic transmissions
- Regulatory mechanisms
- Similar devices with difficult working conditions
Standards and approvals
-
Bosch Rexroth RE 90220-01,
-
MAG/ Cincinnati Machine P-70,
-
Denison Hydraulics HF2/HF1/HF0,
-
ZETOR (Proxima, Proxima Plus, Proxima Power, Forterra),
-
COPCO ATLAS
-
FERRIT
-
PONAR-SILESIA
-
DIN 51524 part 2,
-
ISO 6743-4
- Approved for use in mining by the Central Mining Authority
Product specifications
|
Product Specifications |
|
|---|---|
|
Kinematic viscosity at 400C in mm2/s |
44.2 |
|
Viscosity index |
103 |
|
Point point at 0C |
-30 |
|
Flash point in 0C |
227 |
|
Foaming resistance: · susceptibility to foaming: foam volume after 5 minutes of blowing with air at 2500C, · foam durability: foam volume after 10 minutes. Stand at 2500C, in ml |
30 0 |
|
Corrosive action on copper plate, 3 h/1000C, degree of corrosion, standards |
1a |
|
Demulsifying properties - time of emulsion separation with water to obtain: - 40 - 43 ml of oil - 37 - 40 ml of water - 0 - 3 ml of emulsion at temperature; in minutes |
25 |
|
The ability of the oil to release air at 500C in min. |
6 |
| Ability to transfer loads at the FZG stand, degree of breaking load, not lower than | 10 |
NOTE: The presented values are typical and may differ from the actual parameters of the product. The actual parameters are presented in the quality certificates of each batch of products. Melkib is not responsible for their correctness.
Product safety
Responsible person in the EU
ORLEN OIL Sp. z o.o.
ul. Elbląska 135
80-718 Gdańsk, Poland
Reviews
If you've added a review and it doesn't appear on the list, it may be pending moderation.
Leave feedback on the product
Log in with Google
