Hydraulic oil L-HM / HLP 46 Orlen 5l loaded force transmission systems, hydraulic controls, difficult working conditions, elevated temperature, anti-wear, anti-corrosion, antioxidant
Product code: QFS162B50
Leave feedback on the product
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Related products
Select product variant:
Individual variants may differ in price
Secure purchase guarantee
Product description
Properties of L-HM / HLP 46 hydraulic oil
- Hydraulic oil used in hydrostatic systems
- Produced on the basis of very good quality bases with the addition of refining substances that improve its anti-corrosion and anti-wear properties. The unique composition allows you to extend the service life and reduce the wear of components in systems
Use of L-HM / HLP 46 hydraulic oil
- Highly loaded force transmission systems, hydraulic drive and control
- Hydraulic transmissions
- Regulatory mechanisms
- Similar devices with difficult operating conditions
Standards and approvals
-
Bosch Rexroth RE 90220-01,
-
MAG/ Cincinnati Machine P-70,
-
Denison Hydraulics HF2/HF1/HF0,
-
ZETOR (Proxima, Proxima Plus, Proxima Power, Forterra),
-
ATLAS COPCO
-
FERRIT
-
PONAR-SILESIA
-
DIN 51524 part 2,
-
ISO 6743-4
- Approved for use in mining by the Central Mining Office
Product technical data
|
Product technical data |
|
|---|---|
|
Kinematic viscosity at 400C in mm2/s |
44.2 |
|
Viscosity index |
103 |
|
Pour point at 0C |
-30 |
|
Flash point in 0C |
227 |
|
Foaming resistance: · tendency to foam: foam volume after 5 minutes of blowing with air at a temperature of 250 0C, · foam durability: foam volume after 10 minutes. Stand at 2500C, in ml |
30 0 |
|
Corrosion on a copper plate, 3 h/1000C, corrosion degree, standards |
1a |
|
Demulsifying properties - separation time of the emulsion with water to obtain: - 40 - 43 ml of oil - 37 - 40 ml of water - 0 - 3 ml of emulsion at temperature; in minutes |
25 |
|
The ability of oil to release air at a temperature of 500C in min. |
6 |
| Capacity to transfer loads at the FZG station, failure load level, not lower than | 10 |
NOTE: The values presented are typical values and may differ from the actual product parameters. The actual parameters are presented in the quality certificates of each batch of products. Melkib is not responsible for their correctness.
Product safety
Responsible person in the EU
ORLEN OIL Sp. z o.o.
ul. Elbląska 135
80-718 Gdańsk, Poland
Reviews
If you've added a review and it doesn't appear on the list, it may be pending moderation.
Leave feedback on the product
Log in with Google
