Hylomar - PasHylomar Exhaust Assembly Paste 500g high-temp jointing compound for exhaust systems up to 1000°Cta montażowa 500g do układów wydechowych odporna na 1000°C
Product code: MB-0212
Leave feedback on the product
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Secure purchase guarantee
Product description
Hylomar Exhaust Assembly Paste for exhaust systems resistant up to 1000°C
Hylomar Exhaust Assembly Paste 500 g is a water-based, asbestos-free assembly paste designed for assembling and sealing joints in exhaust systems. The product is intended for automotive and general technical applications where exhaust connections must withstand high temperature, pressure and vibration.
The paste performs two functions: it helps the parts slide and fit together during assembly, and after the exhaust system heats up, it cures under heat to form a gas-tight seal. It is a practical solution for assembling pipes, silencers, connectors, elbows and other exhaust system components.
Applications of Hylomar Exhaust Assembly Paste 500 g
Hylomar Exhaust Assembly Paste is used as an assembly paste for exhaust system joints. It is suitable where assembly lubrication and later sealing of the joint are both required after the system is started and heated.
Typical applications include exhaust pipe joints, connectors, elbows, silencers and other components installed in exhaust gas systems. The paste can be used in passenger cars, commercial vehicles, trucks and general technical applications where exhaust joints are exposed to temperature and vibration.
What makes Hylomar Exhaust Assembly Paste different
The main advantage of the product is the combination of assembly support and sealing performance. The paste lubricates joints during assembly, making installation easier and faster, and then cures after the engine is heated, creating a tight seal resistant to typical exhaust system operating conditions.
Hylomar Exhaust Assembly Paste is water-based, asbestos-free and, according to the manufacturer’s data, withstands service temperatures up to 1000°C. After curing, it forms a gas-tight seal resistant to carbon monoxide and vibration.
When to choose Hylomar Exhaust Assembly Paste
Choose Hylomar Exhaust Assembly Paste when assembling exhaust system components and you want to reduce the risk of leakage at the joints. It is especially useful where the connection must be tight and the parts must also fit together more easily during assembly.
This is a paste for assembly and sealing of exhaust joints, not a repair compound for rebuilding damaged pipe sections. If the problem is a hole, crack or material loss, a dedicated exhaust repair product should be selected instead of an assembly paste for joints.
How to use Hylomar Exhaust Assembly Paste
The surfaces to be joined should be clean and free from loose rust, dirt and grease. The manufacturer recommends rubbing down the surface with medium-grade abrasive paper to improve preparation of the application area.
Apply the paste generously to all joints in the system, then assemble the parts immediately after application. After installation, run the engine at low speed and allow the system to heat up. Under the influence of heat, the paste cures and forms a gas-tight seal.
Do not run the engine in closed or poorly ventilated areas. When working on an exhaust system, always consider the risk of high component temperature and exposure to exhaust gases.
Important points before use
Hylomar Exhaust Assembly Paste requires heat to cure. This means that the joint obtains its proper sealing performance after assembly and heating of the exhaust system. The product is not a structural adhesive and does not replace mechanical fastening of components.
The paste is intended for joints and assembly connections in exhaust systems. It should not be treated as a universal repair compound for large holes, perforations or cracks in exhaust components.
Technical data of Hylomar Exhaust Assembly Paste 500 g
| Parameter | Value |
|---|---|
| Product | Hylomar Exhaust Assembly Paste |
| Melkib product code | MB-0212 |
| Product type | Assembly paste for exhaust systems |
| Package weight | 500 g |
| Packaging | 500 g cartridge |
| Formula | Water-based |
| Curing mechanism | Heat curing |
| Colour / appearance | Beige / light brown |
| Specific gravity at 20°C | 1.89 according to ASTM D4659 |
| Service temperature | Up to 1000°C |
| Application | Assembly and sealing of exhaust system joints |
| Typical use areas | Exhaust pipes, silencers, connectors, elbows and other exhaust system joints |
| Properties after curing | Gas-tight seal resistant to vibration |
| Asbestos | Asbestos-free product |
| Cleaning of tools after application | Water or detergent solution, according to the manufacturer’s TDS |
| CLP classification according to SDS | H315: causes skin irritation; H319: causes serious eye irritation |
| Signal word according to SDS | Warning |
Storage
Store in a dry and well-ventilated place at a temperature from 5°C to 25°C. Protect the product from frost, strong sunlight and excessive heat. The packaging should be tightly closed when the product is not in use.
FAQ
Is Hylomar Exhaust Assembly Paste suitable for installing a silencer?
Yes. The product is designed for assembling and sealing exhaust system joints, including connectors, pipes and silencer components.
Does Hylomar exhaust paste cure by itself?
Not in the conventional way. Hylomar Exhaust Assembly Paste is heat-curing. After assembly, the exhaust system must be heated so the paste can cure and form a gas-tight seal.
Does the product withstand high temperature?
Yes. The manufacturer specifies a service temperature of up to 1000°C, which corresponds to demanding exhaust system conditions.
Does Hylomar Exhaust Assembly Paste contain asbestos?
No. According to the manufacturer’s data, the product is asbestos-free.
Will this paste repair a hole in an exhaust pipe?
It is an assembly paste for joints and connections, not a compound for rebuilding large defects. For holes, perforations or cracks, a repair product designed for this type of damage should be selected.
Does the surface need to be prepared before application?
Yes. The surfaces should be clean and free from loose rust, dirt and grease. The manufacturer recommends rubbing down the application area with medium-grade abrasive paper.
Should the parts be assembled immediately after applying the paste?
Yes. The manufacturer recommends applying the paste to the joints and assembling the parts immediately after application.
How should tools be cleaned after using the paste?
According to the manufacturer’s TDS, tools used for application can be cleaned with water or a detergent solution.
Product safety
Responsible person in the EU
Melkib Klus Raczek Spółka Komandytowa
ul. Stawowa 91
43-400 Cieszyn, Poland
Reviews
If you've added a review and it doesn't appear on the list, it may be pending moderation.
Leave feedback on the product
Log in with Google
