KONTAKT CHEMIE ANTISTATIK 100 Antistatic Spray, 200 ml
Product code: 1035519
Leave feedback on the product
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Secure purchase guarantee
Opis produktu
KONTAKT CHEMIE ANTISTATIK 100 is an isopropanol-based antistatic agent supplied in a 200 ml aerosol. It prevents the accumulation of electrostatic charges on textiles and plastics.
The product forms a thin, almost invisible conductive film that helps prevent electrostatic discharge on the surfaces of treated materials.
APPLICATION
- Cleaning and neutralising electrostatic charges on glass, acoustic screens, covers and acrylic glass.
- Preventing electrostatic discharge through contact with seats, textiles and carpets.
- Temporary protection against antistatic discharge on plastic frames and packaging materials.
BENEFITS
- After application, surface resistance falls below 1010 ohms.
- Materials treated with the product can be classified as electrostatic dissipative.
- The film is transparent and almost invisible.
- The active ingredient is water-soluble.
- Biodegradable according to OECD 301B.
TECHNICAL DATA
| Parameter | Aerosol 200 ml | Large container |
|---|---|---|
| Specific gravity (at 20°C) | 0.75 ± 0.1 g/cm³ | |
| Flash point | < 0°C | 12°C |
| Coverage* | 1.5 m² / 200 ml | 8 m² / litre |
* Coverage depends on the characteristics of the substrate.
| Dry film properties | Data |
|---|---|
| Drying time | 15–30 minutes |
| Appearance | Transparent |
| Solubility | In water and alcohol |
| Biodegradability | Yes (OECD 301B) |
| Surface resistance on transparent PVC film | 1,108 Ω (measured using an SRM® 110 meter) |
| NATO stock number | 6850-12-172-9350 |
|---|---|
| Packaging listed in the documentation | Aerosol: 200 ml; canister: 5 l |
INSTRUCTIONS
- For best results, spray the product directly onto the surface.
- Two applications to the area are recommended. Additional coats further reduce surface electrostatic resistance.
- For completely transparent surfaces, apply the product to a colourless cloth before wiping. This helps avoid visible marks and cleans the surface.
LIMITATIONS AND SAFETY
- The active ingredient is water-soluble. If treated surfaces are exposed to high humidity or mechanical stress, repeat the treatment at regular intervals.
- The solvent and active ingredient are compatible with most plastics and textiles, but compatibility should be checked before use. Take particular care to avoid stress cracking when using the product on plastics subject to mechanical stress, such as polycarbonate.
- The product contains a flammable solvent. Avoid contact with any sources of heat or sparks during application and until the evaporated solvent has been completely removed.
Reviews
If you've added a review and it doesn't appear on the list, it may be pending moderation.
Leave feedback on the product
