Kodisil HAC-A transparent silicone sealant 310ml H.B. Fuller silicone adhesive flexible, water resistant, UV
Product code: 15040899
Leave feedback on the product
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Secure purchase guarantee
Product description
Ködisil HAC-A – Transparent silicone sealant 310 ml
Ködisil HAC-A is a high-quality, single-component silicone sealant and moisture-curing adhesive based on the acetoxy system. Its transparent, pasty consistency and resistance to weather conditions, chemicals and temperature make it an ideal solution for both construction and industrial applications. This product is distinguished by its exceptional flexibility and wide range of compatibility with various materials.
Application of Ködisil HAC-A
- Gluing frameless aquariums and terrariums
- Connecting glass blocks (glass bricks)
- Seals in building structures
- Industrial applications - assembly and gluing of various elements
Product properties
- One-component - easy to use, no mixing required
- Curing under the influence of moisture
- High resistance to weather conditions, UV radiation and ageing
- Good chemical resistance to sea water, diluted acids, salt solutions, cleaning agents and fruit acids
- Flexible after curing (extended movement to 20%)
- Does not require priming on most glass and ceramic surfaces
- Transparent product - ideal for aesthetic applications
Suitable substrates
- Glass
- Various aluminum alloys
- Various types of ceramics
Surfaces must be clean, dry, free of dust, grease and ice before application. For some substrates, mechanical preparation of the surface or the use of an appropriate primer is recommended.
Technical parameters
| Parameter | Value |
|---|---|
| Technology / base | Silicone rubber (acetoxy system) |
| Color | Transparent |
| Density | 1.0 g/cm³ |
| Skin formation time | 15 minutes |
| Shore A hardness | 23 (after 14 days) |
| Temperature resistance | From -40°C to +180°C |
| Tear strength | 5 N/mm |
| Maximum movement capacity | 20% |
| Volume shrinkage | 3% |
| Curing system | Moisture |
| Consistency | Pasty |
| Compliance with standards | DIN 32622 |
Precautions
- Do not use for gluing PMMA (polymethyl methacrylate)
- Not suitable for old and dirty glass surfaces in aquarium production
- It is recommended to perform preliminary tests for non-standard substrates
Storage recommendations
The product should be stored in its original, unopened packaging at a temperature between 10°C and 25°C. The shelf life is specified on the packaging. Avoid exposure to direct sunlight and high humidity.
Note: Before use, read the safety data sheet (SDS) and product label. If necessary, contact your local representative. p>
Product safety
Manufacturer
HB Fuller Europe GmbH
WERNER-VON-SIEMENS-STR. 2
31515 Wunstorf, Germany
Responsible person in the EU
HB Fuller Europe GmbH
WERNER-VON-SIEMENS-STR. 2
31515 Wunstorf, Germany
Reviews
If you've added a review and it doesn't appear on the list, it may be pending moderation.
Leave feedback on the product
Log in with Google
