Körapren FU 36 650 g, cold contact adhesive, solvent-borne polychloroprene, for wood PVC metal and mineral substrates, 15 min flash-off, heat resistance 70°C
Product code: 15028407
Leave feedback on the product
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Related products
Secure purchase guarantee
Product description
Discounted product – Expiry date: 14/01/2026
Körapren FU 36 650 g is a one-component, solvent-borne cold contact adhesive based on polychloroprene rubber, with physical curing. It is suitable for bonding on mineral substrates and on metal. Thanks to its spreadable consistency, it allows even application with a brush or a notched trowel.
Advantages and unique features
- Cold contact adhesive – convenient for typical installation work.
- Suitable for mineral substrates and metal.
- Spreadable consistency – apply with a brush or a notched trowel.
- Recommended flash-off / waiting time: approx. 15 min.
- Heat resistance of cured bond up to 70°C.
- Conditionally moisture resistant (depending on application and service conditions).
Properties and applications
- Type: contact adhesive, one-component, physical curing.
- Color: amber.
- Typical substrates: chipboard, plywood, wood, PVC, mineral materials, various aluminium and steel alloys, and other substrates.
- Surface requirements: dry, clean, and free of grease.
- Application: apply evenly to both parts; after flash-off, assemble accurately and press firmly.
- Important: not suitable for bonding polystyrene foams.
Technical parameters
| Parameter | Value |
|---|---|
| Net content | 650 g |
| Technology / base | Polychloroprene rubber, solvent borne |
| Product type | Cold contact adhesive |
| System | One-component |
| Curing | Physical |
| Color | Amber |
| Density | 0.86 g/cm³ |
| Solid content (by weight) | 25% |
| Viscosity (20°C) | 3200 mPa·s |
| Flash-off / waiting time | 15 min |
| Consumption | 250 g/m² |
| Heat resistance (cured) | 70°C |
| Processing temperature | 15°C to 30°C |
| Recommended storage temperature | 10°C to 25°C |
| Tool cleaning | helmitin 676/2 |
| Moisture tolerance | Conditionally moisture resistant |
| Limitations | Not suitable for bonding polystyrene foams |
Storage recommendations
Store in the original, unopened container at 10–25°C. High temperatures shorten shelf life, while low temperatures may temporarily increase viscosity. Check shelf life information on the packaging.
FAQ
1) How long should I wait after application?
Recommended flash-off time is approx. 15 minutes. Bond when the adhesive film is slightly tacky but does not transfer to the finger when pressed lightly.
2) Can it bond metal and mineral substrates?
Yes, it is suitable for bonding on mineral substrates and metal.
3) Is it suitable for polystyrene foam (EPS)?
No, it is not suitable for bonding polystyrene foams.
4) How do I clean tools?
Clean tools immediately after use; helmitin 676/2 is recommended.
Product safety
Manufacturer
HB Fuller Europe GmbH
WERNER-VON-SIEMENS-STR. 2
31515 Wunstorf, Germany
Responsible person in the EU
HB Fuller Europe GmbH
WERNER-VON-SIEMENS-STR. 2
31515 Wunstorf, Germany
Reviews
If you've added a review and it doesn't appear on the list, it may be pending moderation.
Leave feedback on the product
Log in with Google
