L-HM / HLP 68 hydraulic oil 20l Orlen loaded power transmission systems, hydraulic controls, difficult operating conditions, elevated temperature, antiwear, anti-corrosion, antioxidant
Product code: QFS165K20
Leave feedback on the product
Related products
Secure purchase guarantee
Product description
Properties of hydraulic oil L-HM / HLP 68 20l
- Hydraulic oil for use in hydraulic hydrostatic systems
- Produced on high quality base oils with the addition of refining substances and improving its anti-corrosion and anti-wear properties. Unique formula allows you to extend the service life and reduce the wear of components in systems
Application of hydraulic oil L-HM / HLP 68 20l
- Highly loaded force transmission systems and hydraulic drive and control
- Hydraulic transmissions
- Regulatory mechanisms
- Similar devices with difficult operating conditions
Standards and approvals
Bosch Rexroth RE 90220-01,
MAG/ Cincinnati Machine P-69,
Denison Hydraulics HF2/HF1/HF0,
FAMUR,
Bumech,
FERRIT
DIN 51524 part 2,
ISO 6743-4
Approved for use in mining by the Central Mining Office
Product Specifications
|
Product Specifications |
|
|---|---|
|
Kinematic viscosity at 40°C in mm2/ s |
66,2 |
|
Viscosity index |
99 |
|
Pour point at 0C |
-30 |
|
Flash point at 0°C |
228 |
|
Foam resistance: · foaming tendency: volume of foam after 5 minutes of blowing with air at 2500°C, · foam durability: foam volume after 10 min. Stand-out at 250° C,in ml |
30 0 |
|
Corrosive action on copper plate, 3 h/1000C, degree of corrosion, standards |
1a |
|
Demulsifying properties - the time of separation of the emulsion with water to obtain: - 40 - 43 ml of oil - 37 - 40 ml of water - 0 - 3 ml of emulsion at temperature; in min. |
25 |
|
The ability of the oil to emit air at a temperature of 500°C in min. |
8 |
| Load carrying capacity at FZG station, degree of destructive load, not less than | 10 |
NOTE: The values presented are typical values and may differ from the actual product parameters. The actual parameters are presented in the quality certificates of each batch of products. Melkib s.c. does not take responsibility for their correctness.
Product safety
Responsible person in the EU
ORLEN OIL Sp. z o.o.
ul. Elbląska 135
80-718 Gdańsk, Poland
Reviews
If you've added a review and it doesn't appear on the list, it may be pending moderation.
Leave feedback on the product
Log in with Google
