LOXEAL 11 Activator for anaerobic adhesives aerosol 200 ml, curing accelerator for anaerobic adhesives, for metal, plastics and glass, green activator spray

LOXEAL 11 Activator for anaerobic adhesives aerosol 200 ml is a specialised auxiliary product in spray form that accelerates the curing of anaerobic adhesives and improves adhesion on less reactive metal surfaces and plastics. Applied to one side of the joint, it shortens the curing time of the bond to just a few tens of seconds, speeding up assembly processes and ensuring reliable, repeatable joints.

Advantages and unique features

• Speeds up anaerobic adhesives – final bond strength achieved after about 20–120 seconds, depending on the adhesive and joint gap.
• Improves bonding on low-reactivity metals and on metal–plastic and metal–glass combinations.
• Convenient aerosol form – easy and uniform application of a thin activator layer on the surface.
• Can be used as component B of the two-part adhesive 33-47.
• Long surface activity – up to 24 hours, with recommended adhesive application within 1 hour.
• Clear liquid based on organic compounds in alcohol – the carrier evaporates quickly.
• Practical 200 ml package – ideal for workshops, service centres and production lines.

Properties and applications

• Faster curing of anaerobic adhesives: reduces the time required to form the bond to 20–120 s depending on adhesive type, gap and ambient temperature.
• Activation of low-reactivity metals: enhances adhesive performance on substrates with lower chemical activity.
• Metal–plastic joints: recommended, for example, when bonding metal parts to PVC – the activator is applied to the plastic part.
• Metal–glass joints: used together with 33-47 A+B adhesive; AT-11 is applied to the glass to reduce stresses in the bond.
• Precise application: a thin, even layer sprayed from a distance of around 10–20 cm minimises product consumption and keeps the bonding area clean.

Technical data

Storage recommendations

Store LOXEAL 11 Activator for anaerobic adhesives aerosol in its original, tightly closed container away from open flames, sparks and high temperatures. The product is flammable and should be kept in a well-ventilated area, protected from direct sunlight. Pressurised cans must be protected from mechanical damage and stored out of reach of children.

FAQ

What is Loxeal Activator-11 used for?
It is an activator designed to speed up the curing of anaerobic adhesives and to improve their performance on less reactive metal substrates, plastics and glass.

How should the activator be used when bonding metal parts?
Apply a thin layer of activator to one side of the cleaned and degreased joint, allow the solvent to evaporate, then apply the anaerobic adhesive to the other side of the joint and assemble the parts.

Can LOXEAL 11 be used on plastics and glass?
Yes, for metal–PVC joints the activator is sprayed onto the plastic, and for metal–glass joints with 33-47 A+B adhesive, AT-11 is applied to the glass to reduce stresses in the bond.

How long does the surface remain active after application?
The surface remains active for up to 24 hours, but for best results the adhesive should be applied within 1 hour of using the activator.

What safety precautions are necessary?
The product is flammable and may irritate the skin and strongly irritate the eyes, so it must be used in a well-ventilated area, with contact with skin and eyes avoided and with standard precautions for pressurised aerosols observed.