Loctite 406 universal instant adhesive, very low viscosity, for very fast bonding of plastics, rubber and other elastomers
Product code: 1925295
Leave feedback on the product
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Related products
Select product variant:
Individual variants may differ in price
Secure purchase guarantee
Product description
Properties
Loctite 406 is a low-viscosity cyanoacrylate instant adhesive. It perfectly bonds plastics, rubbers and elastomers, it is great for gluing o-rings. Using the activator, Loctite SF 770 it additionally glues hard-to-glue plastics (PTFE Teflon, polyolefins, silicone rubber).
Benefits of using
- very quickly combines plastics and elastomers
- low viscosity
- with primer possible bonding of low-energy materials
Use
Instant bonding of plastics and rubbers.
Specifications
|
Product Specifications |
|
|---|---|
| Colour |
Transparent |
|
Chemical base |
cyanoacrylate |
|
Key materials |
plastics and elastomers |
|
Curing time |
2-10 seconds |
|
Operating temperature range |
-40 °C to +120 °C |
|
Viscosity in mPa·s |
20 |
|
Shear strength after 24 h @ 22 °C, ISO 4587, N/mm², steel |
15,5 |
|
Available packaging |
20 ml, 50 ml, 500 ml |
Instructions for use
- For best results, clean and degrease the surfaces with Loctite SF 7063.
- In the case of gluing low-energy plastics, use Loctite Primer before applying the adhesive and wait for it to dry.
- If it is necessary to use an activator, apply it on one of the surfaces.
- Apply the adhesive on one of the surfaces (do not apply to the surface on which the activator is applied.
- Press the bonded elements and hold until the glue hardens.
Storage
Store in dry and cool rooms. Recommended temperature from +2ºC to 8°C. Heat the product to ambient temperature before use. Its optimal conditions of use are 22 °C and 50 % relative humidity. Storage at a temperature outside the recommended range may irreversibly change the properties of the product.
Product features
- Maximum Operating Temperature in °C 120
- Color Clear transparent
- Minimum Operating Temperature in °C -40
- Adhesive type Ethyl cyanoacrylate
- Setting / skin formation time 2-10 sec.
Product safety
Manufacturer
Henkel Polska Sp. z o.o.
Domaniewska 41
02-672 Warszawa, Poland
Responsible person in the EU
Henkel Polska Sp. z o.o.
Domaniewska 41
02-672 Warszawa, Poland
Reviews
If you've added a review and it doesn't appear on the list, it may be pending moderation.
Leave feedback on the product
Log in with Google
