Loctite 454 transparent cyanoacrylate gel instant adhesive, non-drip, universal, for vertical and overhead surfaces, for metal, plastics, elastomers and porous materials, for quick repairs
Product code: 88526
Leave feedback on the product
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Related products
Select product variant:
Individual variants may differ in price
Secure purchase guarantee
Product description
Properties
Loctite 454 adhesive is a gel-like product that connects hard-to-glue surfaces, and the joint it creates transfers stresses equally.
Benefits of using
- a universal product that quickly combines a wide range of materials
- additionally combines porous materials - paper, fabric leather and wood
- very high viscosity - possibility of vertical and overhead applications
- with primer possible bonding of low-energy materials
Application
Instant bonding of plastics, metals, rubbers and porous materials in applications requiring a dense, non-flowing product.
Specifications
|
Product Specifications |
|
|---|---|
| Colour |
Transparent |
|
Chemical base |
cyanoacrylate |
|
Key materials |
plastics, metals, elastomers, porous materials (wood, paper, etc.) |
|
Curing time |
5 - 60 seconds depending on the material |
|
Operating temperature range |
-40 °C to +120 °C |
|
Viscosity in mPa·s |
100000 to 300000 |
|
Shear strength after 24 h @ 22 °C, ISO 4587, N/mm², steel |
15,1 |
|
Available packaging |
3 grams, 20 ml, 300 ml |
Instructions for use
- In order to achieve the best results of operation, it is necessary to clean and de-paint all surfaces with Loctite 7063 remover. Accurate degreasing is crucial for proper gluing of elements.
- In the case of gluing low-energy plastics, use Loctite Primer before applying the adhesive and wait for it to dry.
- If it is necessary to use an activator, apply it on one of the surfaces
- Apply the adhesive oo one of the surfaces (do not apply oo the surface on which the activator is applied).
- Press the glued elements and hold until the glue hardens
- Product should be allowed to develop full strength before subjecting to any service loads (typically 24 to 72 hours after assembly, depending on bond gap, materials and ambient conditions.
Storage
Store in dry and cool rooms. Recommended storage temperature is from +2ºC up to 8°C. Heat the product to ambient temperature before use. Its optimal conditions of application are 22 °C and 50 % relative humidity. Storage at a temperature outside the recommended range may irreversibly change the properties of the product.
Product features
- Maximum Operating Temperature in °C 120
- Color Clear transparent
- Minimum Operating Temperature in °C -40
- Adhesive type Ethyl cyanoacrylate
- Setting / skin formation time 5-10 sec.
- Cartridge type 1k plastikowy 310ml
Product safety
Manufacturer
Henkel Polska Sp. z o.o.
Domaniewska 41
02-672 Warszawa, Poland
Responsible person in the EU
Henkel Polska Sp. z o.o.
Domaniewska 41
02-672 Warszawa, Poland
Reviews
If you've added a review and it doesn't appear on the list, it may be pending moderation.
Leave feedback on the product
Log in with Google
