Loctite EA 9464 50 ml 2-part structural epoxy gray adhesive, fast curing, high strength, universal, for metal, thermoplastics, thermosetting laminates, SMC sheets, thixotropic
Product code: 2058065
Leave feedback on the product
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Related products
Secure purchase guarantee
Product description
LOCTITE EA 9464 50 ml is a two-component, thixotropic epoxy adhesive with fast handling strength. It cures at room temperature to form strong bonds on metals, plastics, ceramics and construction materials; the non-sag paste is ideal for gap filling and vertical applications.
Benefits and unique features
- Fast handling strength – shortened working time.
- Thixotropic paste – non-sag, easy application and gap filling.
- High bond strength on metals, composites, hard plastics and ceramics.
- Good shear and peel performance; heat can accelerate cure.
- Simple 1:1 volumetric mix – convenient 50 ml cartridge with static mixer.
Properties and applications
- Substrates: metals (steel, aluminium, galvanized), phenolic plastics, polyester/GRP, hard plastics (ABS, PC), ceramics, rubber, masonry.
- Typical uses: metal/composite assembly, repairs, hardware bonding, panel bonding and woodworking joints, gap filling.
- Curing: room-temperature cure; accelerated by heat.
Technical parameters
| Parameter | Value |
|---|---|
| Technology / type | Epoxy, two-component (resin + hardener) |
| Consistency | Thixotropic, non-sag paste |
| Colour (resin / hardener / mix) | White / black / grey |
| Mix ratio (by volume) | 1 : 1 |
| Mix ratio (by weight) | 100 : 100 |
| Pot life @ 22 °C (100 g) | 15–20 min |
| Fixture time @ 22 °C | ≈ 180 min |
| Shore hardness D | 80 |
| Glass transition temperature | ≈ 50 °C |
| Lap shear strength, steel (ISO 4587) | ~22 N/mm² |
| Lap shear strength, aluminium | ~18–22 N/mm² |
| 180° peel strength (steel) | ~10.5 N/mm |
| Thermal conductivity | ~0.6 W/(m·K) |
| Packaging | Dual-cartridge 50 ml (A+B), static mixer application |
Storage recommendations
Store tightly closed in a dry place, ideally at 8–21 °C. Avoid storage below 8 °C and above 28 °C. Do not return contaminated material to the original container.
FAQ
1) How do I mix LOCTITE EA 9464?
Equal parts by volume 1:1 (100:100 by weight); best applied from a 50 ml cartridge through a static mixer.
2) What is the working time?
About 15–20 minutes (100 g @ 22 °C); typical handling after 3–4 hours.
3) Which substrates are suitable?
Metals, hard plastics, composites/GRP, ceramics, rubber and masonry.
4) Can I accelerate the cure?
Yes, elevated temperature significantly speeds up strength build-up.
Product features
- Cartridge type Typ A 1:1 50ml
Product safety
Manufacturer
Henkel Polska Sp. z o.o.
Domaniewska 41
02-672 Warszawa, Poland
Responsible person in the EU
Henkel Polska Sp. z o.o.
Domaniewska 41
02-672 Warszawa, Poland
Reviews
If you've added a review and it doesn't appear on the list, it may be pending moderation.
Leave feedback on the product
Log in with Google
