Loctite SF 7649 150 ml activator for anaerobic adhesives accelerating curing on passive metals, with large gaps and at low temperatures
Product code: 149321
Leave feedback on the product
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Related products
Secure purchase guarantee
Product description
LOCTITE SF 7649 150 ml is an activator (primer) that accelerates the cure of anaerobic adhesives and sealants. It enables fast cure on passive metals, larger gaps and at low ambient temperatures.
Advantages and unique features
- Significantly reduces fixture and cure times of anaerobic products.
- Effective on passive metals and under low-temperature conditions.
- Very low viscosity for rapid evaporation and uniform surface activation.
- Brush or spray application.
- NSF P1 and NSF/ANSI 61 registrations (potable water; no food contact).
Properties and applications
- Applications: anaerobic priming for retaining, threadlocking, thread sealing and gasketing.
- How to use: apply a thin coat to one/both surfaces, allow solvent to flash off (about 30–70 s), then apply the anaerobic product and assemble.
- On-part life: up to 30 days if surfaces remain clean.
Technical data
| Parameter | Value |
|---|---|
| Chemical base | Acetone; copper salt & aliphatic amine |
| Colour / form | Green, clear liquid |
| Viscosity (20 °C) | ≈ 2 mPa·s |
| Specific gravity (25 °C) | ≈ 0.79 |
| Drying time (20 °C) | 30–70 s |
| Application method | Brush, spray |
| On-part life | ≤ 30 days |
| Approvals | NSF P1; NSF/ANSI 61 (to 82 °C) |
| Storage | +8 to +21 °C optimal; avoid <+8 / >+28 °C |
Storage & safety notes
Highly flammable; store cool and dry, away from oxidisers and ignition sources. Light-sensitive. Do not mix directly with liquid adhesive; use in well-ventilated areas and check compatibility with plastics.
FAQ
1) When should I use this activator?
When anaerobic cure is slow (passive metals, low temperature or larger gaps) or very fast fixture is required.
2) How long after activation can I assemble?
Up to 30 days if the surface remains clean and uncontaminated.
3) Is it suitable for water systems?
Yes, it is registered to NSF/ANSI 61 (no food contact). Always confirm approvals of the anaerobic product you use.
Product safety
Manufacturer
Henkel Polska Sp. z o.o.
Domaniewska 41
02-672 Warszawa, Poland
Responsible person in the EU
Henkel Polska Sp. z o.o.
Domaniewska 41
02-672 Warszawa, Poland
Reviews
If you've added a review and it doesn't appear on the list, it may be pending moderation.
Leave feedback on the product
Log in with Google
