Search
Producers
Login
Loctite SI 5075 2.5cm x 4.27m Silicone insulating and sealing tape - black, sticks only to itself, quickly seals hoses and wires, for electrical insulation repairs
Description
Non-reactive silicone tape recommended for reliable emergency repair of many substrates. LOCTITE SI 5075 only sticks to itself. Typical areas of application are the repair of flexible hoses, cables and tool holders. The tape is also used to repair electrical insulation and for many plumbing applications.
Advantages
- Temperature range - 54C° to +260C°
- wide range of applications (metals, plastics, rubber)
- electrical resistance
- black color, simultaneous sealing and marking leak.
TYPICAL PROPERTIES OF HARDENED MATERIAL
Physical properties: Hardness,
Shore, ISO 868, Shore A scale 50
Tensile strength, ISO 527-3 N/mm² 4.8 (psi) (700)
Tear strength, ISO 34-1 N/mm² 0.6 (psi) (85)
Elongation, ISO 527-3, % 300
Water absorption, ISO 62, %: by weight ≤3
Dielectric constant / loss factor, IEC 60250: 1kHz
Dielectric strength, IEC 60243-1, kV/mm:
0.25 to 0.76 mm 15.7
1.02 mm 11.8
1.3 mm 10.8
1.5 mm 9.8
1.7 to 2.0 mm 7.9
Instructions for use
1. Separate the backing sheet.
2. Unroll a sufficient length of silicone tape.
3. Press the beginning of the tape firmly against the surface and start wrapping.
4. Pull the tape taut while wrapping.
5. Wrap the repaired area with an overlap of 2/3 of the width of the tape.
6. Finish the connection by wrapping the last two turns on top of each other.
Storage
Unless otherwise indicated on the product label, the ideal way to store it is to leave it in closed containers in a cool and dry place. Optimum storage temperature: +8°C to +21°C. Storing at temperatures below +8°C or above +28°C may irreversibly change the properties of the product
Loctite Henkel Premium Partner
Free delivery from 600 EURO to EU Countries*
+48 509 336 666


