Medmix H285sM manual 2K dispensing gun for 380 ml 10:1 coaxial cartridges
Product code: DM2K 380-10-R26-101
Leave feedback on the product
Related products
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Secure purchase guarantee
Opis produktu
Medmix H285sM – manual 2K dispensing gun for 380 ml 10:1 coaxial cartridges
Medmix H285sM is a manual dispensing gun designed for two-component adhesives and sealants supplied in 380 ml coaxial cartridges with a 10:1 mixing ratio. The product SKU is DM2K 380-10-R26-101.
This model is a practical solution when a two-component material must be dispensed from a compatible coaxial cartridge without using a pneumatic or battery-powered applicator. Its manual mechanism operates without an external power supply, while the anti-drip function helps reduce unwanted material flow after the trigger is released.
Applications of the Medmix H285sM dispensing gun
The H285sM is designed for dispensing two-component adhesives and sealants packaged in compatible 380 ml coaxial cartridges with a 10:1 component ratio. It can be used in assembly, manufacturing, maintenance and construction applications where the material is supplied in this specific cartridge system.
The dispensing gun may also be used with selected chemical anchoring systems. However, compatibility depends on the cartridge design, capacity and component ratio rather than the general designation "chemical anchor".
Key features and benefits of the Medmix H285sM
380 ml coaxial cartridge system: the applicator is designed for cartridges containing two components arranged concentrically within a single cartridge assembly.
10:1 component ratio: compatible with cartridge systems designed to dispense ten parts of one component to one part of the other.
Manual operation: no compressed air, batteries or mains power are required. This makes the gun suitable for assembly stations, servicing and on-site applications.
Anti-drip function: the pressure-release mechanism helps reduce unwanted material discharge after the trigger is released, supporting cleaner application and reducing unnecessary material waste.
Reinforced polymer construction: the construction used in the H285 series helps keep the tool lightweight while providing a design intended for professional two-component dispensing applications.
When should you choose the H285sM?
Choose the H285sM when your adhesive or sealant is supplied in a 380 ml 10:1 coaxial cartridge and you need a straightforward manual dispensing solution. It is particularly suitable for intermittent use or applications where compressed air or battery-powered equipment is unnecessary.
What should you check before choosing this dispensing gun?
Cartridge capacity alone is not sufficient to determine compatibility. Before purchasing, verify the cartridge geometry and component ratio. The H285sM is designed for the specific 380 ml 10:1 coaxial cartridge system and should not be considered a universal applicator for all two-component cartridges of a similar capacity.
The two components are mixed by a compatible static mixer attached to the cartridge outlet. The dispensing gun provides the mechanical force required to advance the cartridge pistons.
Technical specifications – Medmix H285sM
| Parameter | Value |
|---|---|
| Manufacturer | medmix UK Ltd. |
| Model | H285sM |
| Manufacturer SKU | DM2K 380-10-R26-101 |
| Tool type | Manual two-component dispensing gun |
| Cartridge type | Coaxial |
| Cartridge capacity | 380 ml |
| Component ratio | 10:1 |
| Drive mechanism | Manual |
| Application method | Bead dispensing |
| Anti-drip function | Yes |
| Construction material | Reinforced nylon / engineering polymer |
Storage
Store the dispensing gun in a clean and dry location, protected from dirt and mechanical damage. After use, remove any remaining adhesive or sealant from exposed components and prevent material from curing on the dispensing mechanism.
FAQ – Frequently asked questions
Which cartridges are compatible with the Medmix H285sM?
The dispensing gun is designed for compatible 380 ml coaxial cartridges with a 10:1 component ratio. Always verify both the cartridge capacity and its mechanical design before purchasing.
Is the H285sM designed exclusively for chemical anchors?
No. It is a manual applicator for two-component adhesives and sealants supplied in compatible 380 ml 10:1 coaxial cartridges. It can also be used with chemical anchoring products that use the same compatible cartridge system.
Can the H285sM be used with 400 ml or 490 ml cartridges?
Do not select a dispensing gun based only on similar cartridge capacity. The H285sM is intended for a specific 380 ml 10:1 coaxial system. Other cartridge formats require a suitable dedicated applicator.
Does the dispensing gun mix the two adhesive components?
No. The dispensing gun mechanically advances the cartridge pistons. The two components are combined and mixed inside a compatible static mixer attached to the cartridge outlet.
Does the H285sM require compressed air or a battery?
No. The H285sM is manually operated and requires no external power source.
Product safety
Manufacturer
medmix UK Ltd
1 Tealgate
RG17 0YT Hungerford, United Kingdom
Responsible person in the EU
Melkib Klus Raczek Spółka Komandytowa
ul. Stawowa 91
43-400 Cieszyn, Poland
Reviews
If you've added a review and it doesn't appear on the list, it may be pending moderation.
Leave feedback on the product
