Molykote G-Rapid plus 400 ml black assembly paste spray

MOLYKOTE G-RAPID PLUS SPRAY 400 ml is an industrial aerosol lubricant for assembly and start-up of metal components. Its formulation with solid lubricants (including molybdenum disulfide and graphite) builds a black film on the surface, easing assembly, reducing friction and helping prevent scuffing under high loads.

Benefits and unique features

• MoS₂ and graphite particles – lubrication under demanding load conditions
• Black lubricating film – improved slip and cleaner work
• Spray delivery – precise application into hard-to-reach areas
• Works well for first start-up and assembly of parts
• For metal parts: bolts, pins, guides, shafts, beds

Properties and applications

• Assembly lube: facilitates joining and disassembly, reduces seizing and galling
• Start-up and run-in: the lubricating layer lowers wear during initial operation
• Mechanism maintenance: improves metal-to-metal sliding in guides and linear systems
• Service & MRO: workshops, automotive, general industry

Technical parameters

Storage recommendations

Pressurised container: protect from sunlight and do not expose to temperatures > 50 °C. Store cool and well-ventilated, away from ignition sources. Do not pierce or burn, even after use. Do not spray onto open flame or glowing materials. Read the Safety Data Sheet before use.

FAQ

1) Why is the lubrication performance high?
Because of solid lubricants – MoS₂ and graphite – forming a black, low-friction film on metal.

2) Typical parts?
Metal threaded joints, pins, guides, shafts and sliding bearings – during assembly and start-up.

3) Is it flammable?
Yes, it is an extremely flammable aerosol – keep away from ignition sources and ventilate.

4) Basic safety tips?
Avoid inhalation of spray mist, prevent contact with eyes/skin, keep away from fire, do not heat above 50 °C.

5) Suitable for plastics?
Primarily for metals; for other substrates perform a small-area test first.