Molykote YM-103 16kg lithium soap based grease paste for metal/metal, metal/plastic connections, resistant to water, corrosion, oxidation, good adhesion
Product code: 1502304
Leave feedback on the product
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Related products
Select product variant:
Individual variants may differ in price
Secure purchase guarantee
Product description
Molykote YM-103 16kg
Molykote YM-103 is a high-performance grease designed specifically for use in plastic components. This product is ideal for lubricating plastic and metal components in a variety of industrial applications, including automotive, electrical and precision mechanical equipment.
Applications
- Lubrication of plastic components in electrical and electronic equipment
- Lubrication of plastic and metal components in the automotive industry
- Precision mechanical devices, including office equipment
- Lubrication of components sensitive to dirt
Properties
- Compatible with most plastics
- Good load-bearing capacity
- High wear resistance
- Minimal leakage, which allows for use in areas requiring cleanliness
- Long grease life
Parameters technical
| Parameter | Value |
|---|---|
| Appearance | Yellow |
| Base oil viscosity @ 40°C | 29 mm²/s |
| Penetration (working 60 cycles) | 300 mm/10 |
| NLGI grade | 1 to 2 |
| Operating temperature range | -45°C to +150°C |
| Density | 0.90 g/cm³ |
| Dropping point | 195°C |
| Leakage (100°C, 24 hours) | 3.0% |
| Evaporation (99°C, 22 hours) | 0.2% |
| Oxidation resistance (99°C, 100 hours) | 0.02 MPa |
| Corrosion copper (100°C, 24 hours) | 1a |
| Weld Load (Four Ball Test) | 5,200 N |
| Wear (Four Ball Test, 1 hour) | 0,40 mm |
| Starting Torque at -40°C | 93 mN·m |
| Running Torque at -40°C | 49 mN·m |
Storage and Handling Recommendations
- Store in original, tightly closed container in a cool and dry place
- Avoid direct sunlight
- Shelf life is 36 months from date of production
- Before use, ensure that surfaces are clean and free from contamination
- The product can be applied with a brush, spatula or automatic lubrication device
Safety
Before use, read the Safety Data Sheet (MSDS). The product should be used in accordance with the manufacturer's recommendations and occupational health and safety regulations. Appropriate personal protection should be used to avoid contact with eyes and skin.
Product safety
Manufacturer
UNIVAR Poland Sp. z o.o.
Sławęcińska 14
05-850 Ożarów Mazowiecki, Poland
Responsible person in the EU
UNIVAR Poland Sp. z o.o.
Sławęcińska 14
05-850 Ożarów Mazowiecki, Poland
Reviews
If you've added a review and it doesn't appear on the list, it may be pending moderation.
Leave feedback on the product
Log in with Google
