Multicut Micro SP 51 water-immiscible synthetic metalworking oil (MQL micro-lubrication), PROFIL Verbindungstechnik recommendation, low evaporation and atomization, for aluminum, steel and, if necessary, non-ferrous metals
MULTICUT MICRO SP 51 has been specially manufactured for use in the micro-spraying technique. Sophisticated ingredients cause slight spraying and slight evaporation. The base liquid depolymers at 280 °C to 360 °C and leaves no cracking residues.
MULTICUT MICRO SP 51 based on the high proportion of refining additives is particularly suitable for cutting steel and aluminum in the area of lubrication with minimal quantities. The product is conditionally suitable for processing non-ferrous metals. Application devices should not be equipped with copper wires.
- immissible with water oil for metalworking
- based on synthetic substances
- contains derivatives and synthetic fatty substances
- contains sulfur-containing biocatalysts
Appearance color DIN ISO 2049
|Density/15°C kg/m³ DIN 51 757|| |
Viscosity/40°C mm²/s DIN 51 562
Flash point °C DIN ISO 2592
Based on our experience, we can say that commonly known cleaning agents, such as water-alkaline solvents, neutral and hydrocarbon cleaning agents, can be used for degreasing with MULTICUT MICRO SP 51.
Cleaning results depend on the machining time, complexity, contamination level of the parts being cleaned, cleaning system and the temperature of the cleaning agent. Water-alkaline and neutral cleaning agents usually require temperatures above 60 °C.
Recommended storage temperature above 5 °C. Compaction due to low temperature storage is reversible.
Please also include the data in the safety data sheet.
This information corresponds to the state of our current knowledge. They do not exempt users from self-checks. From our information, it is not possible to derive a legally binding assurance of certain characteristics or suitability for use for a specific purpose. The recipients of our products should comply with any applicable laws and regulations that apply to the use and handling of our products on their own.