Naftochem AKORIN N-2 17 kg, protective anticorrosion preservation grease for metals, NLGI 2, resistant to fresh and salt water, for storage and transport, cold or 70–100°C application

Naftochem AKORIN N-2 17 kg is a protective grease for temporary preservation of metal parts, designed to protect against atmospheric corrosion during storage and transportation. It is made from high-quality base oils and a special hydrocarbon thickener, creating a durable, non-cracking protective layer on the surface. AKORIN N greases feature very good adhesion to metals and resistance to water wash-off.

Advantages and unique features

• Excellent anticorrosion protection for metals during storage and transport.
• Resistant to fresh and salt water and to water wash-off.
• Outstanding adhesion to metal surfaces.
• Protects metal surfaces in very difficult conditions (including industrial atmosphere).
• Forms a durable non-cracking film that does not attract dust and dirt after drying.
• Can be applied cold or in molten state (70–100°C).

Properties and applications

• Application: temporary protection against atmospheric corrosion of metal products, machines and equipment (including rolling bearings) during storage and transportation.
• Conditions: normal and harsh climates; industrial atmosphere (e.g., underground mining, construction, agriculture), marine and tropical climates.
• Typical parts: chassis, profiles, slides, open gear drives, chain drives (incl. link and ladder chains), joints, adjusting screws, splines, spindles.
• Surface preparation: remove dust, chips, mud, rust, salt residues and moisture; remove residues of other greases.
• Cold application: manual greasing on metal surfaces.
• Molten application: 70–100°C, by dipping or brush.
• Operating temperature range: -20°C to +40°C.

Technical parameters

Storage recommendations

Store in closed containers, protecting the product from moisture, sunlight (UV) and mechanical contamination. Recommended storage temperature: -20°C to +35°C. Shelf life: up to 3 years.

FAQ

1) What is Naftochem AKORIN N-2 used for?
It is a protective grease for temporary preservation of metals, preventing atmospheric corrosion during storage and transportation.

2) What is the difference between AKORIN N-1, N-2 and N-3?
The grades differ in consistency and dropping point. N-1 is NLGI 1, N-2 is NLGI 2 and N-3 is NLGI 3.

3) How can I apply the grease?
Apply cold manually, or apply in molten state (70–100°C) by dipping or brush.

4) Does the protective film attract dust?
It forms a durable layer that does not attract dust and dirt after drying.