Penetrating Oil FG H1 400 mL, fast release for seized bolts, silicone-free corrosion protection for food-area maintenance
Product code: 30256-AA
Leave feedback on the product
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Secure purchase guarantee
Product description
Penetrating Oil FG 400 mL is an H1-class penetrating oil designed to quickly loosen seized parts in areas where incidental food contact may occur. It creeps deep into threads, displaces moisture and leaves a thin corrosion-inhibiting film that makes dismantling easier.
Benefits and unique features
- NSF H1 registration – suitable for food-processing zones (incidental contact)
- Fast penetration and rust release – easier loosening of seized fasteners
- Leaves a corrosion inhibitor – aids re-assembly
- Silicone-free – paint-shop friendly
- Safe on all metals and most plastics and rubbers
Properties and applications
- Disassembly: nuts, bolts, studs, pins, valves, couplings, pulleys
- Maintenance: breaks down rust, scale and dried grease deposits
- Industries: MRO, food industry, automotive, paper mills, agriculture, marine
- How to use: spray directly on the part from about 15–25 cm and allow to penetrate
Technical parameters
| Parameter | Value |
|---|---|
| Form | aerosol – penetrating oil |
| Fill size | 400 mL |
| Registration / certification | NSF H1 (No. 140260), Halal (AN001183) |
| Appearance | colourless liquid |
| Specific gravity at 20 °C | approx. 0.82 g/cm³ |
| Film viscosity after evaporation (40 °C) | approx. 38–41 cSt |
| Flash point (without propellant) | approx. 87 °C |
| Boiling point (without propellant) | approx. 218 °C |
| Solubility in water | insoluble |
| Materials compatibility | safe for metals and most plastics/rubbers |
| Silicones | none |
| Product code | 30256 |
Storage recommendations
Store below 50 °C away from heat and flames. Apply in short bursts; clean the nozzle after use. When stored correctly the product has a long shelf life.
FAQ
1) Food-area safe?
Yes, H1 registration allows use where incidental food contact may occur.
2) Contains silicones?
No — silicone-free.
3) Using on seized bolts?
Spray from ~15–25 cm, allow time to creep, then loosen; repeat if necessary.
4) Material compatibility?
Suitable for all metals and most plastics/rubbers.
5) How to store the aerosol?
Keep away from heat/sunlight and below 50 °C; the can is pressurised and highly flammable.
Product safety
Manufacturer
CRC INDUSTRIES EUROPE SPÓŁKA Z OGRANICZONĄ ODPOWIEDZIALNOŚCIĄ ODDZIAŁ W POLSCE
Wilcza 31 / 1A
00-544 Warszawa, Poland
Responsible person in the EU
CRC INDUSTRIES EUROPE SPÓŁKA Z OGRANICZONĄ ODPOWIEDZIALNOŚCIĄ ODDZIAŁ W POLSCE
Wilcza 31 / 1A
00-544 Warszawa, Poland
Reviews
If you've added a review and it doesn't appear on the list, it may be pending moderation.
Leave feedback on the product
Log in with Google
