Pressol PT-1 oil for plastic processing liquid based on light fractions and additives for pressing steel sheets, does not cause discoloration, excellent evaporation
Description
PRESSOL PT-1 is a rapidly evaporating agent used mainly in the process of pressing steel sheets, in particular varnished sheets used in the production of roofing materials. Developed on the basis of light petroleum fractions and appropriate enriching additives, it has a number of beneficial properties and a wide range of applications.
Properties:
- Excellent evaporation: The agent evaporates from the sheet surface in an average time of about 40 minutes (depending on ambient temperature and humidity).
- Very good wettability and penetration of the sheet metal surface: the liquid ensures adequate coverage of the sheet metal surface, thanks to which the stamping process runs more efficiently.
- High lubricating properties: The additives used protect the varnish layer on the surface of the sheet against damage during the stamping process.
- No negative impact on the paint layer: The product does not cause discoloration or damage to the paint layer.
Usage:
- Mainly used in the production of roofing materials: it is intended for use in the process of stamping painted steel sheets in the production of roofing materials.
- The surface of the sheet metal after treatment does not require additional activities: After use, there is no need to degrease or use other washing operations.
- Wide application in industry: It can also be used in other industries for stamping thin sheets and painted and galvanized steel elements, where high surface cleanliness after processing is required.
- Diversity of application methods: can be applied to the metal surface with a brush, roller or by spraying.
Storage method:
- Store in a dry and cool place, away from direct sunlight.
- Avoid contact with fire and other sources of ignition.
- Properly protect the packaging from access by children.
- In accordance with the regulations on hazardous substances, store in a manner appropriate for this type of product.
Parameters:
Product Specifications |
|
---|---|
Kinematic viscosity at 20°C |
1.51mm2/s |
Kinematic viscosity at 40°C |
1.16mm2/s |
Kinematic viscosity at 50°C |
1.03mm2/s |
Open cup flash point |
46°C |
Closed cup flash point |
43°C |
Corrosive action on steel plates, 24h/60°C |
holds |