Shell Omala S4 GXV 68 209L synthetic gear oil ISO VG 68

Shell Omala S4 GXV 68 209L – synthetic gear oil ISO VG 68

Shell Omala S4 GXV 68 209L is a synthetic industrial gear oil in ISO VG 68 viscosity grade, intended for enclosed gearboxes, geared motors and circulating or splash-lubricated systems. It is designed for applications where stable lubrication, micro-pitting resistance, gear protection and long lubricant life under demanding operating conditions are important.

The 209L packaging is intended for production plants, maintenance departments and service teams that regularly operate gear systems requiring lower-viscosity ISO VG 68 gear oil. It is a drum format for planned oil changes, larger systems and keeping stock for industrial maintenance.

Product name clarification

This item was previously listed as Shell Omala S4 GXV Plus 68 209L. For this viscosity grade, the technical data sheet identifies the product as Shell Omala S4 GXV 68, without the “Plus” designation. Therefore, for webshop, ERP, BaseLinker and Allegro use, the recommended product name is Shell Omala S4 GXV 68 209L.

Application of Shell Omala S4 GXV 68

Shell Omala S4 GXV 68 is intended for industrial gear systems requiring a synthetic gear oil in ISO VG 68 viscosity grade. It can be used in enclosed gearboxes, geared motors, industrial reduction gears and circulating or splash-lubricated systems where this oil type and viscosity are specified by the equipment manufacturer.

The product is suitable where operation at variable temperatures, reduced friction, good low-temperature performance and protection of gears and bearings against wear are important. Before use, always confirm the required viscosity grade in the equipment manufacturer’s documentation.

Typical uses of Shell Omala S4 GXV 68 209L

• enclosed industrial gearboxes requiring ISO VG 68 oil,
• geared motors and industrial reduction gears,
• circulating or splash-lubricated systems,
• gearboxes operating under variable temperature conditions,
• systems requiring protection against micro-pitting,
• planned oil changes in production plants and maintenance departments.

What distinguishes Shell Omala S4 GXV 68

Shell Omala S4 GXV 68 is formulated using synthetic base fluids and an advanced additive system. According to the technical data sheet, the product provides resistance to breakdown during long-duration and/or high-temperature operation and supports protection against wear, corrosion and micro-pitting.

The ISO VG 68 grade has a lower viscosity than ISO VG 150, 220, 320, 460 and 680 variants. It should be selected only where this viscosity grade is specified by the equipment manufacturer. It should not be automatically replaced with higher viscosity grades only because the products belong to a similar gear oil family.

When to choose Shell Omala S4 GXV 68

This product should be selected when gearbox documentation specifies a synthetic gear oil in ISO VG 68 viscosity grade or when the existing item record used code 550047084 but the name must be corrected from Shell Omala S4 GXV Plus 68 209L to Shell Omala S4 GXV 68 209L.

The 209L version is suitable for companies that regularly use this oil, perform planned oil changes and need to keep stock for gear systems requiring ISO VG 68.

Important points before use

Before use, check the gearbox manufacturer’s documentation and confirm that ISO VG 68 is the required viscosity grade. When changing from another oil, make sure the system is clean, free from contamination and compatible with the lubricant requirements of the gearbox.

Do not mix different types of gear oils without confirming compatibility. The technical data sheet indicates that Shell Omala S4 GXV 68 is compatible with mineral-oil-based industrial gear lubricants, but to obtain the full benefit it should not be mixed with other oils.

Technical data of Shell Omala S4 GXV 68 209L

Storage

Store in the original, tightly closed and properly labelled container, in a dry place, away from direct sunlight, heat sources, water and contamination. The drum should be protected from damage, as gear oil cleanliness is important for the durability of gears, bearings and cooperating components.

FAQ

Is this product Shell Omala S4 GXV Plus 68 or Shell Omala S4 GXV 68?

For this viscosity grade, the correct product name according to the technical data sheet is Shell Omala S4 GXV 68. If the item record contains Shell Omala S4 GXV Plus 68 209L, it should be corrected to Shell Omala S4 GXV 68 209L.

Which item code should be used for Shell Omala S4 GXV 68 209L?

Use item code 550047084. I do not have confirmed evidence of a new 550074… code for the ISO VG 68 209L variant.

Is Shell Omala S4 GXV 68 a hydraulic oil?

No. Shell Omala S4 GXV 68 is a synthetic industrial gear oil for gearboxes and gear systems, not a hydraulic oil.

What gearboxes is Shell Omala S4 GXV 68 used for?

It is intended for enclosed gearboxes, geared motors, industrial reduction gears and circulating or splash-lubricated systems where the equipment manufacturer requires ISO VG 68 gear oil.

Can ISO VG 68 be replaced with ISO VG 150 or ISO VG 220?

Viscosity grades should not be changed without checking the machine documentation. ISO VG 68 has a lower viscosity than ISO VG 150, 220, 320, 460 and 680, and incorrect viscosity may affect operating temperature, oil film and gear protection.

Does the 209L packaging require special delivery?

Yes. The 209L packaging should be treated as an oversized product and set up for pallet or non-standard delivery according to the store’s shipping configuration.