Synthetic PAO food grade compressor oil ANDEROL FG XL 32 ISO VG 32, NSF H1, Kosher, Halal, for rotary-screw compressors

ANDEROL FG XL 32 is a next-generation synthetic (PAO) food grade compressor lubricant designed for compressors operating in food processing plants and for applications where incidental food contact may occur. The product is NSF/H1 registered and certified Kosher and Halal, supporting common audit and compliance requirements. Its advanced additive technology provides additional detergency to help prevent lacquer and varnish formation in the compressor system.

Advantages and unique features

• NSF/H1 registered + Kosher and Halal certified – supports food industry compliance.
• Synthetic PAO base (non-toxic) – stable, predictable lubrication.
• Detergency – helps reduce varnish, lacquering and deposits.
• Fewer oil changes and lower oil consumption.
• Less downtime – extended maintenance intervals.
• Excellent anti-wear properties; rust and oxidation inhibited.
• Good water separation (demulsibility).

Properties and applications

• Application: recommended for rotary-screw compressors and other rotating equipment where incidental food contact may occur.
• Standards/classification: meets or exceeds DIN 51506 and ISO 6743-3 DAJ.
• Temperature range: nominal operating range is -35/-40°C to 170°C.
• Compatibility: compatible with compressor seals, gaskets, hoses and system components; no special precautions are required when changing over from a mineral oil.
• Additional note: tested and found compatible for use in ammonia systems.

Technical parameters

Storage recommendations

Store in tightly closed original packaging, in a dry place, away from direct sunlight and heat sources. Prevent contamination (water, dust, cleaning agents). Refer to the Safety Data Sheet (SDS) for detailed storage and handling guidance.

FAQ

1) What does NSF H1 mean for ANDEROL FG XL 32?
It is a registration for lubricants suitable for applications where incidental food contact may occur.

2) What compressors is this lubricant recommended for?
Rotary-screw compressors and other rotating equipment in food processing plants.

3) What are the viscosity values?
ISO VG 32; kinematic viscosity is 34.5 cSt at 40°C and 6.3 cSt at 100°C.

4) Is changeover from mineral oil complicated?
No – compatibility with typical seals and system components is similar to mineral oils, with no special precautions required.