Synthetic oil LUBCON TURMOFLUID HSA 46 for spindles and bearings 5 l
Product code: 602716040
Leave feedback on the product
Hungary, Slovenia, Slovakia, Germany, Latvia, Luxembourg, Lithuania, the Netherlands, Estonia, Denmark, Czech Republic, Belgium, Austria
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Secure purchase guarantee
Product description
LUBCON TURMOFLUID HSA 46 – synthetic oil for spindles and bearings
LUBCON TURMOFLUID HSA 46 is a synthetic industrial oil designed for lubricating components that require reliable operation at high speeds and across a wide temperature range. Compared with typical mineral oils, it shows relatively low viscosity changes with temperature, helping to reduce power losses and energy demand in the system.
Applications
TURMOFLUID HSA 46 can be used, among others, for lubricating rolling and plain bearings, spindles lubricated with oil or oil-air systems, guideways, sintered bearings, precision measuring instruments and control equipment. The product is also suitable for selected turbine and synchronous motor applications.
Properties and benefits
The oil is characterised by stable viscosity behaviour across temperature changes, high oxidation resistance and properties that support protection of lubricated components against corrosion. Its performance characteristics make it suitable for mechanisms operating at low temperatures and in high-speed applications.
Product selection
Before use, check the machine manufacturer’s requirements regarding oil type, viscosity and permitted operating temperature range. TURMOFLUID HSA 46 should only be used where its parameters meet the requirements of the specific lubrication system.
Technical data
| Parameter | Value |
|---|---|
| Product type | synthetic oil |
| Model | TURMOFLUID HSA 46 |
| Colour | yellow / transparent |
| Operating temperature range | -40°C to +120°C |
| Capacity | 5 l |
| Packaging | metal canister |
Storage
Store the product in its original, properly closed packaging in accordance with the manufacturer’s current recommendations stated in the safety data sheet. No unverified storage temperature range is provided here.
Safety
Before use, consult the current safety data sheet and follow the safety requirements applicable at the workplace as well as the machine manufacturer’s recommendations.
FAQ
What is LUBCON TURMOFLUID HSA 46 used for?
The oil is intended, among others, for lubricating rolling and plain bearings, spindles, guideways, sintered bearings and selected turbines, synchronous motors and precision equipment.
Is TURMOFLUID HSA 46 suitable for high-speed spindles?
Yes. The product is intended for use in spindles lubricated with oil and oil-air systems, and the label describes it as a synthetic oil for high-speed applications.
What is the operating temperature range of TURMOFLUID HSA 46?
The stated operating temperature range is from -40°C to +120°C.
Is the oil suitable for low-temperature operation?
Yes. TURMOFLUID HSA 46 is a synthetic oil intended for applications that also include low-temperature operation.
What packaging does this offer include?
This offer applies to the 5 l variant supplied in a metal canister.
Can it replace any ISO VG 46 oil?
No. A replacement should not be selected solely on the basis of the number “46” in the product name. Before changing lubricant, compare the machine manufacturer’s requirements and the properties of both products.
Reviews
If you've added a review and it doesn't appear on the list, it may be pending moderation.
Leave feedback on the product
Log in with Google
