TUFCUT Spray 400 ml, metal cutting lubricant with EP additives, drilling & tapping stainless steel, NSF H2, up to 200 °C
Product code: 31579-AA
Leave feedback on the product
Shipping cost for the selected product
The shipping cost applies to this product (in the selected variant - if applicable). It may change after adding other products to the cart.
Secure purchase guarantee
Product description
TUFCUT Spray 400 ml is a specialist metal-cutting aerosol combining lubricants, EP additives and antioxidants. It boosts machining performance, enables heavier cuts with tight tolerances and improves the finish of machined parts.
Benefits and unique features
- High efficiency in drilling, tapping, reaming and turning stainless and high-strength steels
- High-pressure, tenacious lubricating film – reduced tool wear and better surface finish
- Ready-to-use aerosol for fast, pinpoint application
- Insoluble in water – stays longer in the cutting zone
- NSF H2 registration – suitable for use in food-processing areas (no food contact)
Properties and applications
- Difficult materials: stainless, high-speed and high-carbon steels
- Operations: drilling, tapping, thread cutting, reaming, turning and parting
- Industries: toolmaking, moulds & dies, metal fabrication, parts manufacturing
- Use: shake can; apply a thin film to the tool or cutting zone; re-apply as required
- Safety: extremely flammable aerosol; use in well-ventilated areas away from ignition sources
Technical parameters
| Parameter | Value |
|---|---|
| Net content | 400 ml |
| Appearance (spray) | Brown liquid in aerosol, oily odour |
| Specific gravity at 20 °C (without propellant) | ≈ 0.70 g/cm³ |
| Temperature capability | Up to 200 °C |
| Solubility | Soluble in solvents, insoluble in water |
| Classification | Extremely flammable aerosol (H222); pressurised container (H229) |
| Registration | NSF H2 (Spray variant) |
| Shelf life | Up to 6 years (proper storage) |
Storage recommendations
Store at ambient temperature away from heat and direct sunlight; always below 50 °C for aerosols. Pressurised container – do not pierce or burn, even after use. Keep dry, well-ventilated and out of reach of children.
FAQ
1) Best-suited operations?
Drilling, tapping, reaming, turning and thread cutting on difficult steels.
2) Use in food facilities?
Yes, Spray is NSF H2 registered – for use in processing areas without food contact.
3) Water miscibility?
Insoluble in water, so it remains in the cut zone.
4) Safety notes?
Extremely flammable aerosol; ensure ventilation and keep away from ignition sources.
5) Shelf life?
Up to 6 years under recommended storage conditions.
Product safety
Manufacturer
CRC INDUSTRIES EUROPE SPÓŁKA Z OGRANICZONĄ ODPOWIEDZIALNOŚCIĄ ODDZIAŁ W POLSCE
Wilcza 31 / 1A
00-544 Warszawa, Poland
Responsible person in the EU
CRC INDUSTRIES EUROPE SPÓŁKA Z OGRANICZONĄ ODPOWIEDZIALNOŚCIĄ ODDZIAŁ W POLSCE
Wilcza 31 / 1A
00-544 Warszawa, Poland
Reviews
If you've added a review and it doesn't appear on the list, it may be pending moderation.
Leave feedback on the product
Log in with Google
