Tangit PVC-U adhesive for PVC-U pipes and fittings 1kg

Tangit PVC-U is a one-component, special solvent-based adhesive based on stabilised tetrahydrofuran, designed for bonding PVC-U components in piping systems. The product is used to create durable, tight and water-resistant joints in pressure and non-pressure installations used in construction, industry and domestic systems.

The adhesive meets the requirements of European Standard EN 14814 for adhesives for thermoplastic piping systems for fluids under pressure and European Standard EN 14680 for adhesives for non-pressure thermoplastic piping systems. It also complies with the guidelines of the Association of Plastic Pipe Manufacturers and has a National Institute of Hygiene approval for contact with drinking water.

Packaging: 1kg.

APPLICATION

Tangit PVC-U is used for the installation and repair of pressure pipelines and for making joints in water supply and sewage systems. The product can be used in the chemical and petrochemical industries, construction and domestic installations. It is intended for PVC-U joints where tightness, water resistance and compliance with thermoplastic piping system standards are required.

ADVANTAGES

• Creates strong, tight and water-resistant PVC-U joints.
• Suitable for pressure and non-pressure systems.
• Meets the requirements of EN 14814 and EN 14680.
• Approved for contact with drinking water by the National Institute of Hygiene.
• Thermal resistance corresponds to the thermal resistance of PVC-U.
• Has a working time of approximately 4 minutes at 20°C and a 1 mm layer thickness.
• Suitable for construction, industrial and domestic installations.

TECHNICAL DATA

SURFACE PREPARATION

Before bonding, the surfaces to be joined should be clean and dry.

DIRECTIONS FOR USE

Apply an even layer of adhesive to both surfaces to be joined, then assemble the parts and hold them in position for several minutes to ensure proper curing of the joint. After application, leave the joint for approximately 24 hours to achieve full strength.

STORAGE AND SHELF LIFE

Store the product in a cool, dry place, away from heat sources and direct sunlight. The adhesive should be stored in its original, tightly closed packaging, away from children, animals and food sources.

WARNING

The adhesive contains a solvent based on stabilised tetrahydrofuran. During use, follow the safety precautions appropriate for solvent-based adhesives and refer to the product safety data sheet.

FREQUENTLY ASKED QUESTIONS