Technical cleaner in aerosol 750ml low viscosity cleaning agent, chlorine-free, transparent

Technical remover 750ml is a highly effective cleaning agent in the form of an aerosol, designed to remove heavy industrial dirt. The chlorine-free formula of this product, based on strong solvents and organic compounds, is perfect for dissolving hardened greases, deposits, old layers of adhesives, waxes, oils and other contaminants. Transparent, with a characteristic odor and low viscosity, it is an ideal solution for assembly, repair and maintenance work in the machinery and automotive industries.

Properties:

• The product does not contain trichloroethane and is filled with CO2 gas, which makes it safe for the environment.
• Effectively dissolves difficult dirt, including synthetic and natural greases, deposits, adhesives, waxes and oils.
• After application, it does not leave any stains or deposits, which is important for work that requires cleanliness.
• Can be used on most surfaces, although caution is recommended when working with plastic and painted materials.
• Environmentally friendly product, does not destroy the ozone layer.

Application:

• Ideal for cleaning components before installing clutches, brake discs, gears and other devices.
• Removes old maintenance layers, preparing the surface for applying new protective coatings.
• Effective in removing old grease and dirt in the machinery and automotive industries.

How to use:

1. Preliminary cleaning - The surface should be mechanically cleaned of loosely adhering dirt, such as adhesives or old grease.
2. Application -apply the remover in a thin layer to the surface you want to clean and leave for several dozen seconds to allow the active ingredients to work.
3. Removing dirt -Remove dissolved residues with a cloth or paper towel. Repeat the procedure until the surface is completely clean.
4. Drying - On porous or absorbent surfaces, it is necessary to wait an additional 10 to 15 minutes for the agent to evaporate completely.

Parameters:

Safety tip:

• Storage - Containers with the product should be kept away from sources of heat and open flame.
• Caution - It is recommended to test it on a small surface before using it on new materials, especially plastics and painted materials.